1/10 Slash 換5.5t定8.5t好

新手只知個kv數有分別
但實質有乜唔同,我真係唔知
去到kws間間都唔想解釋咁
好鬼無引
我現買左3架有刷車想轉BL
1/10 Slash
1/10 desert truck
1/10 rustler

我買左60A及5.5T
是否esc 電流A值愈大愈好?
是否kv愈大愈好？
電就愈大mah及放電值C數愈好？
我相信唔會係咁，因不想盲目地買下去

我買左60A及5.5T
是否esc 電流A值愈大愈好?  
--> Yes, higher 電流A值 esc can support faster motors.  
是否kv愈大愈好？
--> Higher kv means the motor can rotate faster at a given voltage.  eg: [email protected]=22200rpm while [email protected]=40700rpm.  Faster motor (or higher kv) needs better esc, better battery and the run time is less, but it is faster.
電就愈大mah及放電值C數愈好？
--> yes, higher C數 can support faster motor without damaging the battery
我相信唔會係咁，因不想盲目地買下去
just ask here, many people will help you.

If you are a new player, you should start something slower, like a 10.5 or 8.5 motor in a 2WD buggy/truggy.  2WD does not need too much power, otherwise, it spins out easily and you will not have too much fun.  OR you can try 4WD, its much easier to drive.

2wd 60a+8.5t(4300kv)+3cell lipo 好好玩!!

不過高KV扭力會細D

我買左60A及5.5T
是否esc 電流A值愈大愈好?  
--> Yes, higher 電流A值 esc can support faster motors.  
是否kv愈大愈好？
--> Higher kv means the motor can rotate faster at a given voltage.  eg: 3000kv ...
hardmankam 發表於 2009-12-12 11:00

                               
登錄/註冊後可看大圖

Thanks so much for you advise ...
我裝左5.5T上車, 比想像中快好多 ...
我會試8.5T的 ...