Gmade Spider

原帖由 Skyline 於 2006-7-10 15:33 發表



係wor .... How come I can't think of .... Thanks brother ...

U are more than welcome pal!!!~~~~

so quick buy la...crawl la.....

原帖由 jpmontoya2 於 2006-7-10 15:35 發表


U are more than welcome pal!!!~~~~

so quick buy la...crawl la.....

Hey brother, I saw "至落"  got similar crawler conversion kit last week .... do U think it's the same as what U've got??

原帖由 Skyline 於 2006-7-10 15:36 發表



Hey brother, I saw "至落"  got similar crawler conversion kit last week .... do U think it's the same as what U've got??

I have heard of that but have not seen it wor..

maybe its a copy cat......honestly..this kit is very nice.....holes are nicely fitted and it looks very durable.......so i am happy in what i have purchased....

原帖由 jpmontoya2 於 2006-7-10 15:40 發表


I have heard of that but have not seen it wor..

maybe its a copy cat......honestly..this kit is very nice.....holes are nicely fitted and it looks very durable.......so i am happy in what i  ...

Brother jpmontoya2,

When do you want to get together and CRAW!  This is my Crawler based on TXT.  Looking to get 23mm wheel adapters (right now is 14mm), and bigger tires.....  

原帖由 mikewu 於 2006-7-10 15:56 發表


Brother jpmontoya2,

When do you want to get together and CRAW!  This is my Crawler based on TXT.  Looking to get 23mm wheel adapters (right now is 14mm), and bigger tires.....  

One of the guy in the other forum already made a custom 23mm adaptors..

but dont you think for 23mm...its only big with the rims? but not the tire?
Normally i see them on the LST with low profile tire..which is not too suitable for crawling yeah?

So i am on my way to get the Gmade wheel set as well...i will let you guys know the result of that...but i tell ya...this is one giant truck~

[quote]原帖由 mikewu 於 2006-7-10 15:56 發表

So which motor are u using brother mike wu?

I'm very glad to find the other Spider here. And here is mine with some extra alloy parts.

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

By the way .... where are you crawling your truck?

原帖由 jpmontoya2 於 2006-7-10 16:24 發表
[quote]原帖由 mikewu 於 2006-7-10 15:56 發表

So which motor are u using brother mike wu?

I am using Integy 55T lathes.  The truck was built from a guy in US and I bought it off from Ebay.  
I found "Hobby Hobby" (Gin Cheung) has wheel adapters for Clod which makes the hex to 23mm.  Then I was planning on some Proline wheels and Proline moby (sp?) tires and ready to craw!  
Unfortunately I just snapped the wheel axle.  Thank god someone has a parts Chod and all I need is time to put everything back on....

原帖由 rockdragon 於 2006-7-10 16:54 發表
I'm very glad to find the other Spider here. And here is mine with some extra alloy parts.

                               
登錄/註冊後可看大圖

[img]h ...

Very cool very cool......  Crawlers are rare breed in Hong Kong RC world.  So far I haven't really taking it out for any real crawling action yet.  We should see how many Crawler players here and perhaps we can head to the beach or the old airport runway someday......

Guys, are you planning on adding weight around the rims for better tractions?  

原帖由 mikewu 於 2006-7-10 17:09 發表


Very cool very cool......  Crawlers are rare breed in Hong Kong RC world.  So far I haven't really taking it out for any real crawling action yet.  We should see how many Crawler players here a ...

Present!!
I am a Crawler Newbie
waiting the G-made Kit landing to assemable my new Clod

原帖由 mikewu 於 2006-7-10 17:06 發表


I am using Integy 55T lathes.  The truck was built from a guy in US and I bought it off from Ebay.  
I found "Hobby Hobby" (Gin Cheung) has wheel adapters for Clod which makes the he ...

So u actually bought the adaptor ...but it snaps?

One fo my friend is planning to use 23 Mm wheel...is it a good choice?

原帖由 rockdragon 於 2006-7-10 16:54 發表
I'm very glad to find the other Spider here. And here is mine with some extra alloy parts.

                               
登錄/註冊後可看大圖

[img]h ...

MAMA ME Ahhhhhh

This is one damn good looking truck! And the Alloy axle is a dream piece of hopped up!!!..How much did it cost you man?

Are you using the 23 mm adaptors as well? Where u got it? I am going to use the Gmade Ultra tire which is 14mm

We normally crawl at Diamond hill......hehe....

原帖由 mikewu 於 2006-7-10 17:06 發表


I am using Integy 55T lathes.  The truck was built from a guy in US and I bought it off from Ebay.  
I found "Hobby Hobby" (Gin Cheung) has wheel adapters for Clod which makes the he ...

I'm running 55T motors from Topcad, got them from Challenger. By the way, if you want to use Proline wheels and Proline moab, the 23mm adapter from Hobby Hobby will not work because the offset of the wheels are too deep inside and the tires will rub the links during turning. You're gonna have to go with the adapters from RC4WD ones.

http://rc4wd.com/shop/product_in ... mp;products_id=1196

原帖由 rockdragon 於 2006-7-10 17:21 發表




I'm running 55T motors from Topcad, got them from Challenger. By the way, if you want to use Proline wheels and Proline moab, the 23mm adapter from Hobby Hobby will not work because the off ...

Woooo..... Thanks for the heads up man!  I was gonna pick that up last week but thank got I didn't have enough cash for everything at that time...!  
BTW, there are 2 kinds of moabs.  What are the difference?  Also, do you add any weights inside the tires?

原帖由 rockdragon 於 2006-7-10 17:21 發表




I'm running 55T motors from Topcad, got them from Challenger. By the way, if you want to use Proline wheels and Proline moab, the 23mm adapter from Hobby Hobby will not work because the off ...

Thats why i ask...because thats what i heard form other forum too..and was wondering if you have some magic place to buy that adaptors..but the end result is the same RC4WD!!!
hahaha

Nice truck man.!!!...maybe u Pm us ur contact..and we can do some crawling on...and as i said..another guy will also be buying this Gmade Chassis form this forum..and its gonna be  mad to have 3 Gmade!

Hey brothers, how do you get your hands on the Gmade chassis as I am thinking to get a set for my TLT2 and build another crawler......

原帖由 jpmontoya2 於 2006-7-10 17:17 發表


MAMA ME Ahhhhhh

This is one damn good looking truck! And the Alloy axle is a dream piece of hopped up!!!..How much did it cost you man?

Are you using the 23 mm adaptors as well? Where u g ...

The 23mm adapter set was directly ordered from   RC4WD.com   in America.
That pair of the alloy axle was the last pair I got from GPM (Chin Ngai) some time last year. Can't find them anymore in HKG now. They cost me over 2K+ by then.

Which area in Daimond Hill are you crawling?

原帖由 mikewu 於 2006-7-10 17:32 發表
Hey brothers, how do you get your hands on the Gmade chassis as I am thinking to get a set for my TLT2 and build another crawler......

All u need is $$$$$
ahhahahaha

I got it from ebay.....

原帖由 rockdragon 於 2006-7-10 17:33 發表



The 23mm adapter set was directly ordered from   RC4WD.com   in America.
That pair of the alloy axle was the last pair I got from GPM (Chin Ngai) some time last year. Can't find them anymore ...

Wow!!!..That is sweet....and looks awesome......

did u change to full Aluminium Gears set too?
Ur truck can crawl on anything..!!

Diamond hill....Umm..its abit up in the mountain...but i dont know how to describe...i will ask my friend to post a pics later.>!

Guys!  Any answer for my question?

"there are 2 kinds of moabs.  What are the difference?  Also, do you add any weights inside the tires? "