Slash4x4/2WD技術討論區, 入黎post你地既slash啦 post#1575 Kenblock F150新相加入

又明多了Thank you 米兄

回復 781# tatame


hello!請問 用  高kv 550 (大約幾多kv呢).一般是幾錢左右.有無好介紹.thx!

回復  tatame


hello!請問 用  高kv 550 (大約幾多kv呢).一般是幾錢左右.有無好介紹.thx!
SCOTT 發表於 2010-10-2 16:07

                               
登錄/註冊後可看大圖

scott 師兄~~ 睇睇呢隻~~ 我用緊之前出過report !!! 真係唔錯!!

http://bbs.rc-evo.com/redirect.p ... 390&pid=1737286

                               
登錄/註冊後可看大圖

scott 師兄~~ 睇睇呢隻~~ 我用緊之前出過report !!! 真係唔錯!!
tatame 發表於 2010-10-3 16:58

                               
登錄/註冊後可看大圖

    米兄好毒,睇唔到,盼睇唔到......
    其實可唔可以用4s 來玩

回復 785# ford

我都打算入番隻黎走部slash 2wd 因為今日隻team power又死q左~ 行果70c都死~ 其實kws~d野真係唔多針對offroad~

4600kv a123 3cell 都好足夠啦~ 不過我都係喜歡把聲~ 超正!!!

今早去完TKO玩左一轉,得我同另一位ching 係樹玩(唔記得問佢點稱呼)slash 4x4,有幸佢借左我玩一轉,依家又心思思想再買番一架(之前賣左)

Hi everyone i am the slash 4X4 new guy!!!
Could u tell me how to use 3S(11.1V)Lipo in 4X4
Thanks

回復  ford

我都打算入番隻黎走部slash 2wd 因為今日隻team power又死q左~ 行果70c都死~ 其實kws~d野真 ...
Moonsideryan 發表於 2010-10-3 23:34

                               
登錄/註冊後可看大圖

    2wd用呢隻嘢power會否太大
    另外又長又重放車尾會否偏左了.
    我就會放4x4嗰套 落架 hpi blitz 2wd度玩吓

回復 789# ford

我的slash 2wd 的負重是正常lipo無改的2倍~ 所以我都係扭力行先~

C兄...
請問 Slash4x4 的車轆可唔可以用係 tamiya CR-01 處?
thx!

回復 791# 比利羊


    ok ar 比利羊兄合用

正呀...去邊買平d, 一套四隻幾銀?
其實我都想玩 Slash4x4, 不過貴到無朋友!

回復 793# 比利羊


    代理450 左右

rc 乜under 400

play 2wd 平好多..........呔又共用

正呀...去邊買平d, 一套四隻幾銀?
其實我都想玩 Slash4x4, 不過貴到無朋友!
比利羊 發表於 5/10/2010 02:05 AM

                               
登錄/註冊後可看大圖

貴買平玩, Traxxas  D 車好噤, 個個星期Offroad  玩半年都無野換,
維修成本平好多,
相比下高級1/10平路車的車架價錢,  Slash 4x4 可以 RTR了!

又有新野啦 =P

                               
登錄/註冊後可看大圖

CNC Machined ESC mounting plate for Slash 4x4


CNC Machined from 2.5mm thick aluminum, our Slash 4x4 ESC mounting plate provides a solid flat piece of surface area for mounting most electronic speed controls on the market today. Using existing chassis holes, our electronics plate even accommodates and supports the Velineon ESC. Machined from thick aluminum, this plate will not flex or twist like fiberglass or lexan material mounting plates and prevents damage to the ESC. Our ESC plate also retains the use of the original Traxxas receiver box. Available in anodized blue, red, silver and gun metal

ST6877B/GM/R/S CNC Machined Aluminum ESC mounting plate for Slash 4x4
MSRP: $6.99

CNC Machined Aluminum Slash 2wd motor heatsink plate


CNC Machined from high-grade aluminum to fit perfectly into the contour of the Slash 2wd motor mounting area. This plate help support the plastic transmission/motor mounting area on the Slash 2wd transmission case and help dissipate heat better. This plate also help prevent motor mounting screws from tweaking and twisting the plastic transmission case when it gets hot from the motor. Available in anodized blue, red, silver, and gun metal.

ST3691 CNC Machined Aluminum Slash 2wd motor heatsink plate
MSRP: $9.99

Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4x4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck.

Our unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts.

This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about our body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. We also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings.

Tech Notes: These body mounts and posts are fully height adjustable on the Traxxas Slash. Each part number may be used on the vehicles listed above although adjustability may be limited based on the vehicle used.

#81122 Adjustable Front Body Mounts & Posts for the Traxxas Slash, Rustler & Nitro Rustler
#81142 Adjustable Rear Body Mounts and Posts for the Traxxas Slash, Stampede & Nitro Stampede

Suggested Retail
$9.95 each

10月05日 TKO Slash 相片分享  http://bbs.rc-evo.com/viewthread.php?tid=190764

                               
登錄/註冊後可看大圖

Thanks for sharing!!! 而家TKO塊地情況點呀？睇相上似幾靚仔喎。

Ching 我都係第一次去TKO玩, 之前去過舊機場消防局玩, TKO 沙真係好岩架Slash玩, 石仔唔算太多, 真係好好玩! 當時有另一班人放搖控飛機。

slash 用sc8 official KMC wheel 幾靚=D 有質感同真實感

                               
登錄/註冊後可看大圖