完成了 - Sand Scorcher

Yes....White color Putty from Tamiya~~
jpmontoya2 發表於 2010-2-13 22:30

                               
登錄/註冊後可看大圖

ching, 想請教o下,
如果噴硬殼, 用surface primer 500做底,
會唔會太粗?

ching, 想請教o下,
如果噴硬殼, 用surface primer 500做底,
會唔會太粗?
1524 發表於 2010-2-13 23:20

                               
登錄/註冊後可看大圖

我Putty用開Tamiya 的......但我估Mr. Color 的1000都OK....500就噴新殼好似有D rough...!?

我都怕會粗過頭...要打磨先ok.
maybe都係買枝1000會穩陣 d...

你上完1000後,
會直接上面油, 定係會用水磨沙紙打番滑 d 先再上面油?

你上完1000後,
會直接上面油, 定係會用水磨沙紙打番滑 d 先再上面油?
1524 發表於 2010-2-13 23:45

                               
登錄/註冊後可看大圖

太懶 無做....直上

一樓己更新

Does the rear roll cage fit okay? Some kits have the rear roll cage's hole mis-drilled.

Btw, 有問題既rear roll cage有無得換?

Does the rear roll cage fit okay? Some kits have the rear roll cage's hole mis-drilled.
jas 發表於 2010-2-14 14:27

                               
登錄/註冊後可看大圖

HAHA..my one was from WAI Go...i have heard the parts was stuffed for other kit..

for the kit from WAI GO...they waited for the replacement part from Tamiya before giving to customer..so my one is perfectly fitted!

HAHA..my one was from WAI Go...i have heard the parts was stuffed for other kit..

for the kit from WAI GO...they waited for the replacement part from Tamiya before giving to customer..so my one ...
jpmontoya2 發表於 2010-2-14 14:38

                               
登錄/註冊後可看大圖

Would you kindly let me know ...what did you mention"the rear roll cage " ?
Is it the black one ?
Thanks !

Would you kindly let me know ...what did you mention"the rear roll cage " ?
Is it the black one ?
Thanks !
barrypops 發表於 2010-2-14 18:45

                               
登錄/註冊後可看大圖

hi Barry..

I have only heard this from a friend of mine.......

The reason for the delay of the Sand Scorcher was because of a part was mis drilled with 0.5mm tolerance...so wait for Tamiya to release the item.....

They said its something at the rear...but the member above mentioned its the roll cage...so i think its about that area....

Its the black part that protects the motor from the rear collision..hope it helps!

hi Barry..

I have only heard this from a friend of mine.......

The reason for the delay of the Sand Scorcher was because of a part was mis drilled with 0.5mm tolerance...so wait for Tamiya t ...
jpmontoya2 發表於 2010-2-14 19:15

                               
登錄/註冊後可看大圖

Thankyou so much !

樓主：你的照片達專業水平！可否賜教如何拍攝，需要甚麼器材呢？

Must say that your photos are very pro. Thanks for sharing them with us.

BTW, did you spray the blue colour first or white colour first? Any advice on painting the body to help us? Thanks.

樓主：你的照片達專業水平！可否賜教如何拍攝，需要甚麼器材呢？
s0301399 發表於 2010-2-14 21:21

                               
登錄/註冊後可看大圖

不敢賜教......小弟攝影還是名初哥....

其實只要光源充足....就大致可影出上面那些照片...

當然...要再好一點就可以用些更專業的攝影器材.....

就上面既照片來說....我用了一台DSLR.....加外閃....加微距鏡頭一支...

做法: 先張一張A2 size既黑卡紙做背景....把外閃向天花打....令光源從天花反射到物體上....檢查正確白平衡....按下快門就ok了

Must say that your photos are very pro. Thanks for sharing them with us.

BTW, did you spray the blue colour first or white colour first? Any advice on painting the body to help us? Thanks.
007 發表於 2010-2-14 23:11

                               
登錄/註冊後可看大圖

I am no expert in painting...so i can only tell u what i did...hahaha

Painting steps:
1. Spray Tamiya Putty (white) <--the reason for choosing the white one was because the basic color was a rather light one....and the plastic are also in white...so white putty is enough

2. Spray the TS 26 (Racing White) color...
3. Mask the area where it should be white...(i.e. leaving the light blue area exposed)
4. Spray the Light blue..
5. Spray Clear Coat
6. Optional: u can use polisher to polish the top layer to enhance the shinny effect
7. Apply stickers...

一樓己更新

Stunning paint job

Wah, so pretty. Really want to use it as my wall paper. Thanks for the painting tips.

ching, 想請教o下,
你噴殼, 用噴油定噴筆?
用幾多號?
先藍色之後白色?