RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 4847|回復: 54
打印 上一主題 下一主題
收起左側

T3 可裝齒差嗎?

[複製鏈接]
跳轉到指定樓層
1#
librayiu 發表於 2010-2-16 14:56:02 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
上網 search 左一陣都搵唔到有齒差 for T3 用, 請問 XRAY or 其他廠有出齒差俾 T3 嗎?
2#
 樓主| librayiu 發表於 2010-2-16 15:22:03 | 只看該作者
呀... 應該係, 唔係好 sure 個正確名係咩... gear differential = 牙差 ?
3#
mschumi 發表於 2010-2-16 15:46:26 | 只看該作者
早前我見到極x有得賣牙叉架(38T),唔係(34T),
係自制的,唔係原廠既.
但聽人講自制好容易會漏油(原廠出的都會漏)
但我見到Atomic 賣廣告出VM II 牙叉,但係
到現在都未出,連廣告都cut 左!
但係T3珠叉都掂丫,唔洗換牙叉啦。
4#
 樓主| librayiu 發表於 2010-2-16 17:47:03 | 只看該作者
可能我唔識整或者整得唔正確, 拆出黎用 1200 度沙紙磨返滑 2 塊片, 換埋 ceramic 珠, 清洗埋壓力卑令再上返晒油, 都仲係唔夠順, 有少少 cake 住 cake 住咁...
所以想如果有牙差既換左佢就唔使煩住.
5#
hk_sdu 發表於 2010-2-16 22:57:40 | 只看該作者
可能我唔識整或者整得唔正確, 拆出黎用 1200 度沙紙磨返滑 2 塊片, 換埋 ceramic 珠, 清洗埋壓力卑令再上返晒油, 都仲係唔夠順, 有少少 cake 住 cake 住咁...
所以想如果有牙差既換左佢就唔使煩住.
librayiu 發表於 2010-2-16 17:47


agree with u, ball diff is so troublesome for me as a player just for fun, not racer. I heard Atomic gear diff for xray is still testing, will wait for it.
6#
 樓主| librayiu 發表於 2010-2-16 23:41:11 | 只看該作者
agree with u, ball diff is so troublesome for me as a player just for fun, not racer. I heard Atomic gear diff for xray is still testing, will wait for it.
hk_sdu 發表於 2010-2-16 22:57


真係 testing ? 如果係既一出即買
7#
mschumi 發表於 2010-2-16 23:53:32 | 只看該作者
agree with u, ball diff is so troublesome for me as a player just for fun, not racer. I heard Atomic gear diff for xray is still testing, will wait for it.
hk_sdu 發表於 2010-2-16 22:57

你地係唔係飛街架?
8#
 樓主| librayiu 發表於 2010-2-17 02:38:54 | 只看該作者
我就落 track 玩, 唔飛街的, 不過真係搞唔掂個珠差, 整極都整唔到佢如絲般順滑...
9#
hk_sdu 發表於 2010-2-17 10:36:14 | 只看該作者
9#

i am on track too. Why u ask this? u know many people is using gear diff on track also.
10#
bigman0712 發表於 2010-2-17 21:05:14 | 只看該作者
我就落 track 玩, 唔飛街的, 不過真係搞唔掂個珠差, 整極都整唔到佢如絲般順滑...
librayiu 發表於 2010-2-17 02:38

其實珠差唔難搞的.....但要細心及常清潔同維修.....彈弓....壓力啤鈴....珠仔也要定時換....中心啤鈴系用兩隻的...啤鈴與啤鈴中的溥介子.....珠差片....差速油....中軸羅絲有無駁......
總之玩珠差唔懶得的....要懶就玩雅差la....但效能就真不及珠差好的.....
11#
 樓主| librayiu 發表於 2010-2-17 23:52:56 | 只看該作者
1/3 因為懶, 1/3 真係整唔掂, 1/3 好似 hk_sdu 咁講- for fun, not racer.
所以牙差應該適合我多 d.
麻煩各位 ching 如果知道有 T3 用的牙差, 通知一聲, 謝謝~
12#
beebone 發表於 2010-2-18 00:13:20 | 只看該作者
上網 search 左一陣都搵唔到有齒差 for T3 用, 請問 XRAY or 其他廠有出齒差俾 T3 嗎?
librayiu 發表於 2010-2-16 14:56


夠位咩? 你試下放個NT1齒差睇下得唔得!!!!
13#
 樓主| librayiu 發表於 2010-2-18 00:25:01 | 只看該作者
夠位咩? 你試下放個NT1齒差睇下得唔得!!!!
beebone 發表於 2010-2-18 00:13

唔明... ching 你係想講"得"定"唔得"?
14#
rt476 發表於 2010-2-18 02:51:13 | 只看該作者
I also play with x-ray T-2 ,ball diff must run in when u build it in first time, ching pls see the x-ray set up the ball diff part....tks
15#
bigman0712 發表於 2010-2-18 12:33:59 | 只看該作者
1/3 因為懶, 1/3 真係整唔掂, 1/3 好似 hk_sdu 咁講- for fun, not racer.
所以牙差應該適合我多 d.
麻煩各位 ching 如果知道有 T3 用的牙差, 通知一聲, 謝謝~
librayiu 發表於 2010-2-17 23:52

玩車唔可以咁架......懶整而轉雅差無咩問題.....但如果系因為整唔掂就要轉雅差就有問題la....set差速系基本入門就要識的....就算改左雅差...改得唔好一樣系唔襟的....E家除入門車外全是用珠差的....一系玩入門車.....但系隻傘齒都好易掃的.......如果你無心玩....不如唔好玩o剌....劉返D錢玩自己真系有心玩o既野把la.....
16#
 樓主| librayiu 發表於 2010-2-18 12:40:23 | 只看該作者
本帖最後由 librayiu 於 2010-2-18 12:43 編輯
I also play with x-ray T-2 ,ball diff must run in when u build it in first time, ching pls see the x-ray set up the ball diff part....tks
rt476 發表於 2010-2-18 02:51

I have read the instruction, set the ball diff to loose at the very begining, and slowly tighten it during run-in, right ?
I followed this instruction exactly, but the result is not good. My ball diff has never tighten above the "medium" level. It is always in-between loose and medium.
My friend has exactly the same setting as me, but his ball diff keep running very smooth, so I guess may be I'm a bit bad luck with a defect ball diff...
17#
 樓主| librayiu 發表於 2010-2-18 12:48:19 | 只看該作者
玩車唔可以咁架......懶整而轉雅差無咩問題.....但如果系因為整唔掂就要轉雅差就有問題la....set差速系基本入門就要識的....就算改左雅差...改得唔好一樣系唔襟的....E家除入門車外全是用珠差的....一系玩入門車.. ...
bigman0712 發表於 2010-2-18 12:33

"如果你無心玩....不如唔好玩o剌...." <-- 如果 ching 咁講, 咁我覺得 "懶整而轉雅差" 應該態度上仲有問題過 "整唔掂就要轉雅差" ... 起碼整唔掂係嘗試過而唔係試都唔試.
ching 講既都有你既道理, 不過我諗人人玩車既心態都有少少唔同的...
18#
hk_sdu 發表於 2010-2-18 13:53:48 | 只看該作者
夠位咩? 你試下放個NT1齒差睇下得唔得!!!!
beebone 發表於 2010-2-18 00:13


NT1 gear diff need to DIY modify for T2 or T3, many example out there
19#
hk_sdu 發表於 2010-2-18 13:55:04 | 只看該作者
本帖最後由 hk_sdu 於 2010-2-18 13:56 編輯
"如果你無心玩....不如唔好玩o剌...."
librayiu 發表於 2010-2-18 12:48



haha, yes, 人人玩車既心態都有少少唔同的. If not lipo and BL motor, i will not play EP again. It is just too convenience, human being is always looking for user-friendly and lazy solution
20#
mschumi 發表於 2010-2-18 14:16:26 | 只看該作者
haha, yes, 人人玩車既心態都有少少唔同的. If not lipo and BL motor, i will not play EP again. It is just too convenience, human being is always looking for user-friendly and lazy solution
hk_sdu 發表於 2010-2-18 13:55

Yes 唔係 lipo and Bls 我都會放棄 EP .
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-17 06:49 , Processed in 0.044730 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表