Audi R8R work in progress...Finished!

Hi, just to share with u guys my latest project..Tamiya F103 Audi R8R..
....work is still in progress...

[ 本帖最後由 avenger 於 2006-8-11 22:59 編輯 ]

i'm waiting for this one

原帖由 Mobility 於 2006-7-18 12:42 發表
i'm waiting for this one

me too me too!!!!

I'll definitely buy more than one!!

Hope Tamiya will continue to release more LMP shells!!

原帖由 avenger 於 2006-7-18 01:38 PM 發表


me too me too!!!!

I'll definitely buy more than one!!

Hope Tamiya will continue to release more LMP shells!!

Cheer Bro, when it release, we go to buy together!

More progress today!

Some pics showing the extremely nice carbon fibre cockpit panel and tail lights! (I didn't notice these when I bought the body set!!) Tamiya's product always have good quality!

But the rear wing sticker is very tricky to apply...impossible to avoid 'bubbles' in the screw position. I would recommend painting the silver color of the rear wing and then cut out and paste the audi logo instead of applying the whole sticker to anyone who is going to build this body kit.

[ 本帖最後由 avenger 於 2006-7-18 23:11 編輯 ]

My R8R & XJR-12

原帖由 龍崗小吳 於 2006-7-18 23:56 發表
My R8R & XJR-12

cool stuff!!

can u take a close up pic at the R8R rear wing?

禁多c兄玩 Le Mans, 約唔到玩車, 約出泥吹下水都好!

我都有部R8R, 仲未開工!

原帖由 loken 於 2006-7-19 13:13 發表
禁多c兄玩 Le Mans, 約唔到玩車, 約出泥吹下水都好!

係咪先? 我100% lemans fans...

More progress today!!

Painting the driver took more time than I have expected....

I used Gunze H311 (Gray) for the driver's clothes as they are never pure white....
The sticker are home made and the quality of the sticker is not as good as I have anticipated...but ok la...

....where is the head!!??

helmet painting in progress

The helmet needed a LOT of sanding

[ 本帖最後由 avenger 於 2006-7-23 01:14 編輯 ]

服晒你~~好細緻

原帖由 avenger 於 2006-7-23 01:04 發表
More progress today!!

Painting the driver took more time than I have expected....

I used Gunze H311 (Gray) for the driver's clothes as they are never pure white....
The sticker are home made ...

You paint on the outer of the shell? Is it easy to come out as Gunze H311 is just arcylic paint for static models.  I used to paint from the inside.

原帖由 RX-7FD 於 2006-7-23 01:47 發表
服晒你~~好細緻

Thanks!
Life is boring, have to find something interesting to kill time

原帖由 speedstar 於 2006-7-23 09:59 發表


You paint on the outer of the shell? Is it easy to come out as Gunze H311 is just arcylic paint for static models.  I used to paint from the inside.

I paint from outside of the shell, so that the driver will not appear shiny and waxed.
The Gunze paint is much easier to hand paint and takes up much better than the XF7 I used for the gloves!

原帖由 avenger 於 2006-7-23 11:34 發表

I paint from outside of the shell, so that the driver will not appear shiny and waxed.
The Gunze paint is mu ...

Yes, shiny is a problem...may be I try next time to see whether it works good...

Still in progress!!

The helmet took me longer than the car itself (almost)!!

Process done = sanding, primer, white base, red color, stickers

The stickers are very hard conform to the round surface of the helmet....there is a visible wrinkle in the blue area....

[ 本帖最後由 avenger 於 2006-7-29 18:27 編輯 ]

Oh..the wrinkle....i suggest you to paint it back in Blue..rather than use sticker~

Sigh...
Difficult ma...If I paint the area blue, I still have to cut the "E.Pirro" out...thus still unable to get perfectly flat.
But it is in the 'rear' part of the helmet, not readlly seen when the helmet is attached to the car...
Anyway, I'll try to spray a clear topcoat to see if the 'wrinkle' slightly improve next week.

原帖由 avenger 於 2006-7-29 18:25 發表
Still in progress!!

The helmet took me longer than the car itself (almost)!!

Process done = sanding, primer, white base, red color, stickers

The stickers are very hard conform to the round ...

一字記之曰 '靚'!

在pyc攪個 Le Mens 同樂日, 唔知有冇興趣!