請問有無KO Propo EX5ur 2.4G 用家?

打算買EX5ur 2.4G,
唔知用家或其他ching有無comment?
見到有 d post 話接收唔係咁好 (會比人jam),
唔知用家有無咁o既經驗?

另外, 見介紹裡面有句咁o野: "Ultra High Speed Response requires the use of genuine KO products and digital servos".  唔知對應其他牌子servo有無咩問題?

用緊...唔錯呀..乜事都冇..好正常

ching 用咩servo?

SAVOX   SC-1257

我都用緊...好好無問題... 兩個接收... 正!!!

有無印象食粥同貓店跟o個對receiver...係4ch定2ch呀?
唔該~

(行過KWS...似乎食粥同貓店最平)

SORRY
食粥是否 = 極X??

回復 7# taipo73x

YES~

KO控一向都好穩定
我用過EX11->EX1->NOW 用新十仔
EX5應該都好用
用 KO 或FUTABA SERVO

有無印象食粥同貓店跟o個對receiver...係4ch定2ch呀?
唔該~

(行過KWS...似乎食粥同貓店最平)
1524 發表於 2010-3-18 23:36

                               
登錄/註冊後可看大圖

4ch

receiver 407/408/409都係4CH

THANKS!

因為見到有 d spec. 係跟kr210s...所以想攪清楚~

http://www.kopropo.com/america/index.php?option=com_content&task=view&id=35&Itemid=138

好用價錢合理,有兩個4CH接收未試過JAM機~

EX5UR very good performace in terms of "simple is the best", no jam before.
I think servo is very compatable, I use one very old KO analogue servo and one MG995, no problem at all.

By the way, any ching cal tell me where to buy seperate receiver KR407S or KR210S, and what price ?? Cus I want to use one EX5UR on 4 cars  ha!

EX5UR 2.4g 行到 analogue o既咩??

我有次問食粥呢個model 用唔用到 analogue...
佢睇左一陣....就指住個盒面o個句類似 "Ultra High Speed Response" o既o野,
就話應該唔用得analogue.

印象中有 d post 都話2.4g o既控行analogue servo
有時會燒 servo, 有時會有怪聲. 莫衷一是~

我有支eX5 UR....用analogue servo( blue bird 661, fr 3003) 都會震及運作不太正常.....用其他 digital servos(9452, ko 2343, ds 610/620 ) 都冇問題.....個人認為 ex5ur 好抵玩

回復 16# uchifong

X2... 用3003同三和ERG-XR都會中位打冷震同類似轉盡左既震聲(其實仲有轉多一半先會頂轉向)..
用BLS451就冇震冇怪聲...

用呢隻控未試過JAM機~

But I have no problem to use with my very old KO PS702 FET servo...

回復 18# gimsink


可能同廠會好 d   



咁樓上兩位ching...除左有聲之外...有無咩其他異樣?

回復 18# gimsink

rc10t wow....