Speed Passion 2.0 firmware up-grade問題

請問如果up-grade Speed Passion 2.0Pro電變個Firmware係咪需要買嗰個LCD Professional Program Card先可以駁落電腦到？
另外好似聽有D師兄話用Hobby-Wing嗰個LCD Professional Program Card都可以一樣做到，唔知KWS有冇得賣和大約幾錢？
謝謝幫忙。

請問如果up-grade Speed Passion 2.0Pro電變個Firmware係咪需要買嗰個LCD Professional Program Card ...
remus 發表於 4/5/2010 15:35

                               
登錄/註冊後可看大圖

請問如果up-grade Speed Passion 2.0Pro電變個Firmware係咪需要買嗰個LCD Professional Program Card先可以駁落電腦到？ > 係

另外好似聽有D師兄話用Hobby-Wing嗰個LCD Professional Program Card都可以一樣做到，唔知KWS有冇得賣和大約幾錢？共用的, 大約$150

yes,
$150

唔該曬師兄。

是不是 stock motor mode 才有 turbo charger function呢?
Thx

是不是 stock motor mode 才有 turbo charger function呢?
Thx
samuel20461 發表於 2010-5-4 17:26

                               
登錄/註冊後可看大圖

yes, only stock mode has boost + turbo functions.

請問點樣為之stock motor mode 呢?
因我已upgrade了 ver1.61 firmware, 用11.5r motor,
但都開唔到led card 上11-15 的choice...
要用stock esc or stock motor....?

回復 7# console001


    我都搞不清呢個問題?另外果兩固 mode 有大分別嗎?
希望有 ching 解色一下.Thx......Thx

you will need the LCD programmer to update the firmware on the ESC.
http://www.hobbywing.com/english/ArticleShow.asp?ArticleID=446

in the computer, you can pick which firmware to upload onto the ESC.
eg: 422Stock  or  205Mod  etc...

If you pick 422Stock, you can use functions from 12 to 15. (boost, turbo, delay etc...)
If you pick 205Mod, you can only use the functions from 1 to 11.

422Stock is for motors > or = 10.5R (ie 11.5, 13.5)
205Mod is for motors < 10.5R (ie 8.5, 5.5)

問個白痴問題。。。
stock mode除左有得“開turbo“外，有乜好？
點解唔買個快d既motor？

問個白痴問題。。。
stock mode除左有得“開turbo“外，有乜好？
點解唔買個快d既motor？
manhunt 發表於 2010-5-5 00:43

                               
登錄/註冊後可看大圖

some races only allow you to use a fixed turn of motor (stock racing).  in hong kong, stock motor = 11.5R.  so in order to be faster in these races, some people wants boost and turbo.
so, if you run mod racing, then there is no need to use boost and turbo.  just use the fastest motor you can handle.

sound like cheating...
so, if I don't race,
I can just buy the motor as fast as I want,
and there is no point to upgrade firmware?

sound like cheating...
so, if I don't race,
I can just buy the motor as fast as I want,
and ther ...
manhunt 發表於 2010-5-5 00:56

                               
登錄/註冊後可看大圖

i agree, its almost like cheating... but this is all about business as well.  company A always wants to be faster than company B so people will buy more of A's products.

i find it more fun to have a group of friends racing at around the same speed.  this way, i can improve my skills faster.

if you dont race, just buy whatever you like and dont use the 'turbo' feature, since the turbo feature creates more heat on esc and motor and use more battery as well.

you will need the LCD programmer to update the firmware on the ESC.
in the computer, you can pi ...
hardmankam 發表於 2010-5-5 00:35

                               
登錄/註冊後可看大圖

c hing what do you think in this case :

登錄/註冊後可看大圖

c hing what do you think in this case :

I have only one upgrade file in the dialogue box...
...
console001 發表於 5/5/2010 01:04

                               
登錄/註冊後可看大圖

select "software" on the top

我覺得無話係唔係cheating，賽例只係限用幾多T/kV 既motor，stock mode就係將隻motor用盡

一直以黎賽車就係咁架啦，當人人有stock mode咪公平囉........

回復 14# console001

you have done step #1.

the next step is to plug your esc into the programmer and in Device>ESC Speed Controller
you also need to supply power to the esc and turn on the switch.

登錄/註冊後可看大圖

回復  console001

you have done step #1.

the next step is to plug your esc into the programmer ...
hardmankam 發表於 2010-5-5 01:08

                               
登錄/註冊後可看大圖

I have done that...and no magic....

...stock mode除左有得“開turbo“外，有乜好？
點解唔買個快d既motor？
manhunt 發表於 2010-5-5 00:43

                               
登錄/註冊後可看大圖

look at this....:

登錄/註冊後可看大圖

wrong post...........