電變接電池線overheat

有無ching知道點解我玩完一round8mintes後發覺條紅線好熱有時舊插之焊石都溶化。我用lrp esc navok 4.5t motor 8.6-9gear ratio 5200mah25c電會唔會。motor有事所以loading 大左？

接觸不良

請問你係用T插定係蕉通呢? 另外你條紅/黑線係幾多AWG, 線上有寫的!

esc use T插, battery use係蕉通. cable size same as orignal size of my LRP cable

接觸不良
mouse 發表於 2010/5/27 22:43

                               
登錄/註冊後可看大圖

接觸不良 x 2
亦有可能係大LOAD得濟.....
摩打齒同減速齒過緊，皮帶過緊，XX過緊..........
CHECK晒D野先喇~~~
再唔得....換個摩打試下~~

^^v

I cannot understand your battery connection. ESC use T-plug then battery must T-plug. It is a pair. I can't imagine.
Do you mean your esc uses T-plug connected to a T-plug to bannana plug converted and then  connected to the battery?

esc use T插, battery use係蕉通. cable size same as orignal size of my LRP cable
arbee 發表於 2010-5-28 08:35

                               
登錄/註冊後可看大圖

如果是電流過大，應該紅和黑的線都會熱。
所以好大機會係蕉插和蕉通接觸不良，原因不外是插頭氧化或變形。

己用新線及插都一樣。一般都係玩到第7，8排電後才會overheat。唔知點解？有無方法知motor有無問題呢

5200mah25c電會唔會吾夠navok 4.5t motor 食啊
有無d大C既電用啊