HPI 1/12 Mini Trophy Truck !

tatame · 發表於 2010-7-2 09:46:14

遊客登錄

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

本帖最後由 tatame 於 2010-7-2 10:12 編輯

今次唔係shortcourse ! 係跑desert , baja 既trophy truck !! 用仿真正trophy truck 既suspension 好吸引 : P

登錄/註冊後可看大圖

tatame · 發表於 2010-7-2 09:47:56

‧RTR Ready-To-RUN = FUN!
‧Desert Truck Body
Realistic looking three piece body with 1:1 replica race team graphics with windows to show driver figure set
‧Shaft drive 4WD
4WD for high grip on any surface and the durability of shaft drive
‧Metal Gear Differentials
Tough metal gears for strength and durability
‧Steel Dogbones
Tough Steel Dogbones on all four corners
‧Aluminum Suspension Uprights
High strength aluminum front and rear uprights
‧Aluminum Hubs
Greater strength and durability
‧Realistic Desert Racing Tires
Officially Licensed Yokohama Geolandar Tires
‧4 Wheel Independent Suspension
Soaks up the ruts and bumps of desert terrain
‧Oil filled shocks
Oil filled shocks for smooth suspension dampening
‧Threaded Shock Bodies
Easily adjustable threaded shocks for quick ride height changes
‧Realistic Spare Tires
Two lightweight faux-spare wheels/tires are mounted in the truck bed for realistic desert truck looks
‧Realistic Interior with Two Driver figure set featuring an interior that includes a driver and navigator for the ultimate in realism. Say hello to our two friends!
‧Adjustable Slipper Clutch
The included slipper clutch protects the drivetrain and can be adjusted to suit track conditions
‧Complete Ball Bearings
A complete set of ball bearings is included for drivetrain efficiency and low maintenance
‧Skid Plate Bumpers
Front and rear skid plate bumpers for realistic looks and crash protection
‧Adjustable Body Mounts
Adjustable body mounts to help fine tune the body height and width
‧Tough Chassis
High strength nylon tub chassis for durability
‧Roll Cage
Complete interior roll cage for scale looks and crash protection
‧Compatible Wheels
1.9" wheels with 12mm hex hubs allow you to use a wide variety of aftermarket wheels
‧12mm Hex Hubs
Industry standard for compatibility with a wide variety of optional wheels
‧Desert Truck Suspension
Realistic looking desert truck suspension arms for high grip and scale looks
‧Window box to show scale appearance
Specifications:
Length: 21" - 533.4mm
Width: 9 3/16" - 233mm
Wheelbase: 12 9/32" - 312mm
Height: 6 3/8" - 162mm

tatame · 發表於 2010-7-2 09:52:16

本帖最後由 tatame 於 2010-7-2 10:19 編輯

架mini trophy truck 仿1:1 Trophy truck 既suspension 同soild axle , 留意尾陣,架車避陣有好長既行程

登錄/註冊後可看大圖

Noir.KAZE · 發表於 2010-7-2 10:00:17

其實佢呢隻算唔算係solid axle呢
因為以我所知既solid axle唔會有狗骨之類既野
HPI呢隻就因為個差速固定左係車架,冇得跟避震上下走
所以要用狗骨連去車輪果邊

不過個懸掛design very good同好真實
如果佢係1/10我會考慮入貨XD

tatame · 發表於 2010-7-2 10:09:18

本帖最後由 tatame 於 2010-7-2 10:10 編輯

其實佢呢隻算唔算係solid axle呢
因為以我所知既solid axle唔會有狗骨之類既野
HPI呢隻就因為個差速固定左 ...
Noir.KAZE 發表於 2010-7-2 10:00

登錄/註冊後可看大圖

睇design 佢就盡量仿照1:1 做法!佢條shock 已經移左去中間!! 暫時未有內部相睇!!!希望佢做到同1:1 設計一樣像真啦

Noir.KAZE · 發表於 2010-7-2 10:12:59

睇design 佢就盡量仿照1:1 做法!佢條shock 已經移左去中間!! 暫時未有內部相睇!!!希望佢做到同1 ...
tatame 發表於 2010-7-2 10:09

登錄/註冊後可看大圖

如果懸掛果part可以換哂steel仲正(個feel,但係玩得耐可能爻到9彩=.=")

tatame · 發表於 2010-7-2 10:20:44

本帖最後由 tatame 於 2010-7-2 10:22 編輯

回復 6# Noir.KAZE

唔要個殼~ 加幾塊膠片可以改buggy look ~ 正

登錄/註冊後可看大圖

rk2 · 發表於 2010-7-2 10:25:22

是什麼原因不用較流行的 1: 10 而是 buggy 界的異數 1 : 12 呢 ?

Marco明 · 發表於 2010-7-2 10:28:19

好明顯係4搖臂+狗骨......只係夾硬改尾DAMPER位置防真
膠到9彩同埋1/12........幾乎可以放棄了

tatame · 發表於 2010-7-2 10:36:28

是什麼原因不用較流行的 1: 10 而是 buggy 界的異數 1 : 12 呢 ?
rk2 發表於 2010-7-2 10:25

登錄/註冊後可看大圖

如果1:10 就正la ...................1:12 我都覺得細得濟......

smalljohndoe · 發表於 2010-7-2 10:55:36

好明顯係4搖臂+狗骨......只係夾硬改尾DAMPER位置防真
膠到9彩同埋1/12........幾乎可以放棄了
Marco明發表於 2010-7-2 10:28

登錄/註冊後可看大圖

知唔知trophy truck 係大架過sc?
hpi 唔會細禾虫好多, 仲闊過jammin
HPI
Length: 21" - 533.4mm
Width: 9 3/16" - 233mm
Wheelbase: 12 9/32" - 312mm
Height: 6 3/8" - 162mm

SLASH
Length      22.36 inches (568mm)
Front Track      11.65 inches (296mm)
Rear Track      11.65 inches (296mm)
Weight      76.2oz (2.16kg)
Height (overall)      8.425 inches (214mm)
Wheelbase      13.2 inches (335mm)

禾虫
Length: 533mm (21")
Wheel Base: 324mm (12.75")
Width: 279mm (11")
Weight: 1996g (4.4lbs)

SCRT10
Length: 21" (526mm)
Width: 9" (229mm) behind front wheels, narrowest point
10.1" (258mm) at rear wheels, widest point
Height:  5.4" (137mm)

SPAWN · 發表於 2010-7-2 10:56:15

車尾一擔過先像真,而家都唔知佢想點

smalljohndoe · 發表於 2010-7-2 11:01:26

本帖最後由 smalljohndoe 於 2010-7-2 11:05 編輯

有改進先有進步, 起碼佢試新野, 好過d大陸台灣一味抄
都係果句啦, 未試車都未知咩事

george02 · 發表於 2010-7-2 11:29:29

唔係架架都一擔過架wow

Bridgestone22 · 發表於 2010-7-2 11:51:13

架車好吸引,但快捷代理先最大問題..........

tatame · 發表於 2010-7-2 13:54:11

架車好吸引,但快捷代理先最大問題..........
Bridgestone22 發表於 2010-7-2 11:51

登錄/註冊後可看大圖

多人買的話自己上網訂平過快摺好多~~

manju · 發表於 2010-7-2 14:13:32

架車好吸引,但快捷代理先最大問題..........
Bridgestone22 發表於 2/7/2010 11:51 AM

登錄/註冊後可看大圖

X2

jeffip97 · 發表於 2010-7-2 16:39:19

I WANT ONE!

gibson · 發表於 2010-7-2 21:36:54

The rear looks very complicated bor!!

SCOTT · 發表於 2010-7-2 22:06:48

本帖最後由 SCOTT 於 2010-7-2 22:30 編輯

相信HPI啲膠都吾差.重要有好多支野成個網射住.應該頂得十幾下....好似有心做...睇黎都吾平喎..

		自動登錄	找回密碼
密碼			新玩家註冊