3.7v鋰電一問

EX超龍 · 發表於 2010-8-23 12:42:44

遊客登錄

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

本帖最後由 EX超龍於 2010-8-23 12:47 編輯

第一次使用3.7v鋰電.得紅黑線.有咩要注意?thx~
用7.4v/11.1v鋰電就有平均插黎檢查電壓電流,但3.7就冇

xrayonly · 發表於 2010-8-23 12:49:50

如果係咁,用返 2 cell la !

asaq-wong · 發表於 2010-8-23 13:40:13

3.7v is only one cell, directly check the plug, no need 平均插 woo. ~

cayman · 發表於 2010-8-23 13:55:12

Make sure your 3.7V Li-Po do not over charged. It is better to keep the
Li-Po battery maximum voltage not more than 4.2V +/-0.05V.

hardmankam · 發表於 2010-8-23 14:14:45

There is no need to balance charge 1 cell. Balancing is only for multi-cell lipos.
Newer ESCs will support 1S and have lipo cut for 1 cell. (SXXv2 and Tekin RS etc)
For older ESC w/o lipo cut, just stop playing when the car slows down.

		自動登錄	找回密碼
密碼			新玩家註冊