TA05 ver2 suspension mount parts

Chings pls help, does Tamiya has carbon reinforced parts for TA05ver2 suspension mount, i.e. part M, see picture below...

登錄/註冊後可看大圖

I only know K parts has, don't know if theres carbon reinforced version for M parts. But I would suggest to buy metal for this part.....as this part is one of the most easily damage so should use something stronger.

Yes I know but metal parts = $$$$, if they have enhanced parts less $$, then I can save some $$ for mooncake.....

Yes I know but metal parts = $$$$, if they have enhanced parts less $$, then I can save some $$ for  ...
gimsink 發表於 2010-9-13 14:48

                               
登錄/註冊後可看大圖

   true, but it is really a one off buying unless you really want to try out different combination of toe in angle. Check with te shops for the best bargain

TB-03有出混碳, 不過連油壓架

登錄/註冊後可看大圖

TB-03有出混碳, 不過連油壓架
天娜 發表於 2010-9-13 16:10

                               
登錄/註冊後可看大圖

    不合用..........

true, but it is really a one off buying unless you really want to try out different combina ...
buzzybee82 發表於 2010-9-13 16:01

                               
登錄/註冊後可看大圖

ching, there're many TA05 version, 05la, IFS la, ver 2 la, VDF la, are they sharing the same FF and RR suspension mount ( I mean same mount, just difference toe angle ? )

My car is TA05 v2....i saw my friends' FF03 and 416x, and they look very similar?? I'm really not sure.....you better check with the shop ppl

I actually use it on VDF, almost no VDF's discussion in forum, so I ask about ver2, becasue from manual I reconize that they share the same part M. Are you using metal mount on your ver2 now ?