日本M.Murai R12 setting~

delete lu

正，可以偷師！有冇其他setting參考啊？

回復 2# hardmankam
無啦,有嘅話我會post上黎.

3" camber?????

TRC ONLY NEED 2"

做咩甘快del，我都好想看呀！

做咩甘快del，我都好想看呀！
KIT25 發表於 2010-9-26 01:12

                               
登錄/註冊後可看大圖

我可以send 比你in private~~~~

回復 7# silvavisil
好呀，唔該師兄！

c-hing, 我都想要, 可吾可以send多一份給我呢?

oh... can u send one copy to me... thks

回復 7# silvavisil

師兄,你吾係send比我咩我仲未收到wo....!

send to u  la

回復 12# silvavisil
收到師兄,吾該!!

回復 3# silvavisil
this is yokomo 12th driver Masayuki Murai (second place　last year JMRCA nationals)

August 28th
Indoor paved track (temperature 35C humidity 47%)

Front

Camber angle 3 degree
Caster angle 3.2 degree
Toe angle -1 degree
Skid angle (F-down R-middle)

Suspension Brock optional 0.5mm including kit (standard 0mm)
Spacer under sus brock 1.0mm

Shock oil yokomo #600
Front spring standard (side by side)

Ride height 4.0mm



Center

Shock length 65mm
Spring yokomo black (optional soft)
Shock oil #400
Shock position (F-middle R-standard)

Roll spring black (optional soft)
Roll spring position (inside, this is not standard)
Roll shock oil yokomo #300


Rear

Rear tread width 168mm
Ride height 4.0mm
Ride height spacer 1.25mm down


Tire F yokomo L-rubber medium 43.5mm(additive 2/3, 10minutes)
Tire R yokomo L-rubber medium hard 44mm(additive full, 10 minutes)
Wheel R & F standard


Electric

Motor nosram 4.5T (timing insert : -10)
Spur/pinion kimbrough 88T / yokomo 22T
ESC nosuram V2 (setting 0-3-5-2)
Servo JR 3650
Body zytec or AMR (posting position Font-hole:1 Rear-hole:3)
Transmitter KO herios


these pic are last 11th September

村井正順隻車花........very good !!........

好次直升機頭罩