RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: mikuro
打印 上一主題 下一主題
收起左側

My Pan car ^^

    [複製鏈接]
121#
abcde 發表於 2011-1-29 22:22:44 | 只看該作者
回復 120# abcde
after today broken t bar  and just play 2 1/2 battery of 12 son.....i will go again  tomorrow after 11 am ...
play the f103GT  
122#
lky2000 發表於 2011-1-29 22:29:05 | 只看該作者
again
123#
 樓主| mikuro 發表於 2011-1-29 22:29:20 | 只看該作者
124#
abcde 發表於 2011-1-29 22:36:07 | 只看該作者

ha ha....don't hit me on wall again la ching.....i only got the lastest t bar @ home and if broken again need to buy @ kws...but worry no stock la...
125#
lky2000 發表於 2011-1-29 22:47:14 | 只看該作者
don't let me behind your back
126#
 樓主| mikuro 發表於 2011-1-29 22:47:33 | 只看該作者


Hi Ching, nice to meet you at JV ^^
You play CRC as well. Play next time !!
127#
lky2000 發表於 2011-1-29 22:53:56 | 只看該作者
nice to meet u too next maybe play 12son with you
128#
pd 發表於 2011-1-29 23:40:28 | 只看該作者
nice to meet u too next maybe play 12son with you
lky2000 發表於 2011-1-29 10:53 PM



    Thanksssssssss Iky 2000 technical Support!!!!!!!!!!!!!!!!
129#
 樓主| mikuro 發表於 2011-1-30 11:49:52 | 只看該作者
nice to meet u too next maybe play 12son with you
lky2000 發表於 2011-1-29 22:53


okay ^^
130#
 樓主| mikuro 發表於 2011-1-30 11:50:45 | 只看該作者
Thanksssssssss Iky 2000 technical Support!!!!!!!!!!!!!!!!
pd 發表於 2011-1-29 23:40


btw, pd 兄, 你個 Sophia 好唔好跑? Thanks ^^
131#
pd 發表於 2011-1-30 12:05:59 | 只看該作者
個殼都唔錯,但小弟架車珠差有問題。所以唔知 得唔得!但尋晚見到Proto Form Nissan 好好跑,壓風比較理想。
132#
teamlosi 發表於 2011-1-30 12:27:33 | 只看該作者
請問你們的珠差,玩幾多排電整一次? 如用4.5摩打,和一套汰賣幾錢?
thanks.
133#
 樓主| mikuro 發表於 2011-1-30 12:46:21 | 只看該作者
個殼都唔錯,但小弟架車珠差有問題。所以唔知 得唔得!但尋晚見到Proto Form Nissan 好好跑,壓風比較理想。 ...
pd 發表於 2011-1-30 12:05

yes, it would be better ^^
134#
 樓主| mikuro 發表於 2011-1-30 13:53:02 | 只看該作者
請問你們的珠差,玩幾多排電整一次? 如用4.5摩打,和一套汰賣幾錢?
thanks.
teamlosi 發表於 2011-1-30 12:27


我自己會 12-16 排電左右會磨吓珠差片 ^^
依家 pre-mount tires 1 set (front + rear) 太約 120-130
135#
 樓主| mikuro 發表於 2011-1-30 13:54:27 | 只看該作者
本帖最後由 mikuro 於 2011-1-30 13:57 編輯

DIY setting board ^^
不過, 張 setting sheet 要畫番Toe尺會方便D ><
136#
abcde 發表於 2011-1-30 16:40:17 | 只看該作者
DIY setting board ^^
不過, 張 setting sheet 要畫番Toe尺會方便D >
mikuro 發表於 2011-1-30 13:54

it cool....very nice ar...
137#
 樓主| mikuro 發表於 2011-1-31 19:55:45 | 只看該作者
it cool....very nice ar...
abcde 發表於 2011-1-30 16:40



    Thanks Wai 兄 ^^
138#
 樓主| mikuro 發表於 2011-1-31 19:59:48 | 只看該作者
Luckily got some spare time to have Lipo-cell testing this afternoon.^^
Have tested 2 packs of 1S-lipo again which gave the mean play-time around 12min20sec.
Same ESC setting as previous.
139#
hlsk 發表於 2011-2-1 14:56:36 | 只看該作者
回復 138# mikuro


  Sounds great, 12 mins 20 secs. May u share with us your setups other than Esc settings pls? Roll out, gearings, tires diameter, lipo and motor specs etc. Thanks in advance.

Btw. How can u map the runtime at Jv? Stop watch or lap counter?
140#
 樓主| mikuro 發表於 2011-2-1 15:12:32 | 只看該作者
回復  mikuro


  Sounds great, 12 mins 20 secs. May u share with us your setups other than Esc s ...
hlsk 發表於 2011-2-1 14:56


Hi, as mentioned at #117 or you can see details as follows. Roll-out is about 41mm/rev ^^

Today's test run:-
Have tested the 1S-lipo again
29/1/2010 at JV, 2-4pm
Timer by 4PL, count down for 10min
race start and on going...
Finally I turned my car back to pit area before the ESC lipo-cut activated.
Then, stopped the timer on 4PL and it is found that the reading is around +2min30s, which means the play time is about 10min+2min30s = over 12min30s when using
SXX v2 with 4.0T, ESC setting 1,3,0,0
gear ratio 24/96
Front tire: Xceed medium (dia. before run, about 44.5mm)
Rear tire: Speedmine 30R (dia.before run, about 52.4mm)

and the second run time is about 12min48s. ^^
I need one more set data to justify the play time for using 1S-lipo in JV and I hope to do the same test on the coming pro ten as well ><
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-14 14:34 , Processed in 0.125092 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表