3.7V Lipo 6000mah 60C

請問大家用幾多a數去差, 及大約時間, 差滿大約要幾多V?

can be at least 6A....  full voltage is 4.2V

my one is Silverback 5800mah, 60C,
normally charging at 4.5A for 60-70min, max around 4.2V

Oic, thanks all C-hings!

oh my old cell master only can use max 1a to charge lipo...!!

回復 5# wingscreamer


    How long do you need to fully charge your 1S-Lipo?

over 1.5hours and is still at 3.8v only, I stopped

it is because the cell master-much more was bought in 2006

I may need to buy another charger...

回復 8# wingscreamer


    I am now using iMAX B6AC+ charger (black in colour) and I have no issue with it by far. I got it from redstar. ^^

oh thanks mikuro! do u need to buy additional 火牛 for your Imax?

回復 10# wingscreamer


    No, this is all-in-one adaptor and small in size. It comes with charging wires as well.
    The max. charger current is 5A.
    My 1S-Lipo is cool after charging.

icic thanks so much!

my one is Silverback 5800mah, 60C,
normally charging at 4.5A for 60-70min, max around 4.2V
mikuro 發表於 2010-12-26 01:11

                               
登錄/註冊後可看大圖

Normally all lipos should be charge with 1 or 2c max, if you have a 5800mah lipo, start the charging current with 5.8A, it may shorten the charging time alot

回復 13# hlsk

Thanks for info. ^^
However, B6AC+ only provide a max. charging current of 5A which is the limitation of this charger >_<
But of course, it depends on the need if charging time is a factor.^^

Use 6A to charge the 1S 3.7V Lipo, do you think it will be harmful to the Lipo and
reduce the battery life? Also, will it increase the risk of explosion?

回復 15# wingscreamer

Don't think so.  I am charging my silverback 60C with 7A.  And had try it using 15A before.  Nothing happen during charging and the car have more punch than charging with 7A.  But as I am not sure will any bad things happen I will just use 7A normally.

oic thanks for your sharing!

Happy New Year all Ching!