CRC LE

Hi, mikuro ching,  

If i buy this CRC LE at 2Feb2011 at Cat Shop, is it the same batch with you?
I want to know the kingpin is belonging to "which version"?

Btw, can you post the picture of your kingpin?
I though your one is the same batch as mine.
mikuro 發表於 2011-2-10 11:36

                               
登錄/註冊後可看大圖

回復 40# mikuro

See my king pin. I believed it is the 1st version -  Fully chromed one, hope it is not the silver one (soft king pin).

My stupid iphone can't focus the king pin.

Physic lesson

Take a photo behind a bottle of water.
Object will look bigger.

回復 43# hknewton


    Good take and it is not the soft one! Don't worry !

回復  mikuro

See my king pin. I believed it is the 1st version -  Fully chromed one, hope it is  ...
hknewton 發表於 2011-2-11 22:17

                               
登錄/註冊後可看大圖

How about the colour of the thread? Is it darker than the chrome body?
If so, did you check with Cat shop for replacment?

I think my one is type one.
In the crc photos, there is a lighting at the background. So the thread will become more shiny.
When you check the shaft, the soft king pin is not really shiny.

回復 46# hknewton


    其實如果大家買嘅係第二水貨就應該無問題、第一水就危險d!

回復 47# raymomo

I buy on 2 Feb (2nd shipment)
But not sure why my king pin is not different from ching.

回復 48# hknewton


    Dunno why and just can say u r lucky! And one more tips for all CRC Ching the problem king pin r really easy broken , dun try to play it frist until u can change or buy another !

我與朋友昨天在trc試車我就爆頭尾啤鈴及掃左三隻大減齒，我朋友就掃兩隻大減齒，點解咁易掃大減齒？我現在可能要改48pitch大減齒。

回復 50# 威威

炒車得好勁 or 炒上左壆, 所以掃大減?

回復 50# 威威


    如果係低T motor 唔知點解就一定會掃、可能動力太大、換48pitch就可解決但就孌左加速上無咁細膩不果唔使咁煩成日換齒、啤呤亦係比較弱的一環但應該未至於一次就ko,要下啤呤油記得！

回復 52# raymomo

條唔係條尾太琳, 一加速條尾就落地
如果二樓板升高左, 條尾會唔會琳左??

回復 53# hknewton


    因要就2s lipo都無計、但就要個damper扭多少少 for減底當你加速時成個尾向下壓嘅角度盡量唔好店地、就算店都係side link個兩粒鏍絲、所以有時當直路加速時會見到火花！

回復 54# raymomo

換硬d彈弓得唔得?

回復 55# hknewton


    扭緊d 或換彈弓都得

回復 51# hknewton


    冇炒過行5-6個圈一盡雞就掃。

回復 52# raymomo


    首先唔該師兄回答我的問題；我用5.0摩打，所以我都覺得動力太大所以掃齒，我會更換48pitch.我d啤呤全部有落油，新車順到扑街，落地就扑哂街，現在要換哂d啤呤去。

回復 58# 威威


    要留意尾軸兩面hub位都要留大概0.2mm到空位比佢走唔係好易壓死粒bearing!

回復 59# raymomo

睇睇可唔可以幫到你:

http://www.teamcrc.com/crc/modul ... =article&sid=55