Wooo! great, use what motor and battery? btw...will you consider to change 48pitch spur gear? more durable! (just suggestion...hehe)作者: hihizaza 時間: 2011-2-22 22:00
woooooooo....new member ar!!!!作者: lung_zmc 時間: 2011-2-22 22:20 有得賣喇 幾錢架野作者: kevlau 時間: 2011-2-23 00:15
I also want to buy xray, how much?作者: gon628 時間: 2011-2-23 00:19
有買貴 冇買錯作者: 老M 時間: 2011-2-23 01:46 本帖最後由 老M 於 2011-2-23 01:48 編輯
haha..not saying 建意...just share some of my suggestion, it depends on your need....it seems not enough power for 1S on 1/10....you may consider 2S with more option on motor T.作者: bennymo 時間: 2011-2-23 02:00
Wellcome on board ^^
It is a nice car. There will be many 2WD cars on coming SAT at JV. See if you could join the party ^^作者: mikuro 時間: 2011-2-23 10:45 本帖最後由 mikuro 於 2011-2-23 10:46 編輯
x ray依架係唔係 唔洗換野都用到2s lipo ? 原裝係跟幾多pitch?
lung_zmc 發表於 2011-2-23 03:37
Hello Ching, do you mean 1S on 1/12 pan car?
Taking JV as example, the majority of 1/10 pan car players using 2S Lipo ^^作者: 老M 時間: 2011-2-23 12:41 回復 19#mikuro
Assume you will run your 1/10 pan car with 62mm dia. rear tires, you may try 20/96 - 64pitch which give the roll-out about 40.5mm/rev. Taking LRP 8.5T as an example, the suggested figures would be around 39-41mm/rev.
Also, some of the useful figures had been provided by Ching here. You can check it out.
Indeed, I will test my pro-ten as well and will try to get more data for reference.作者: mikuro 時間: 2011-2-23 22:33 本帖最後由 mikuro 於 2011-2-23 22:38 編輯
woo...nice...quick test run la...8.5T?作者: mikuro 時間: 2011-3-2 10:26
Good and you have the new MT-4 as well ^^
Hope to see in JV soon !作者: 老M 時間: 2011-3-3 20:31 本帖最後由 老M 於 2011-3-3 20:35 編輯
有得賣喇 幾錢架野
