RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1788|回復: 9
打印 上一主題 下一主題
收起左側

那裏有做像真船木材買

[複製鏈接]
跳轉到指定樓層
1#
kawa5525 發表於 2011-3-5 21:27:50 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
各位師兄、請問旺角模型店買唔到模型木材、那處可買到、而且呎吋較齊、謝
2#
Delta. 發表於 2011-3-5 21:56:13 | 只看該作者
飛機木???
3#
wda 發表於 2011-3-5 22:40:40 | 只看該作者
你要那一種木材..蒙船底的木條.還是甲板的..一般蒙船皮是同桐本條..甲板用櫻桃木.柚木等等..船樓可以用白楊木.
4#
andygoody 發表於 2011-3-6 10:48:40 | 只看該作者
偉高, 雷達行有得賣, 雷達行好似多選擇一些
5#
 樓主| kawa5525 發表於 2011-3-6 12:30:15 | 只看該作者
多謝師兄幫忙、誑
6#
 樓主| kawa5525 發表於 2011-3-6 12:30:53 | 只看該作者
多謝師兄幫忙、謝
7#
wda 發表於 2011-3-6 17:25:17 | 只看該作者
不要錯買輕木..因為強度不足的..其實不一定要去模型店買木材..去旺角道那邊的木材行也可以買到合用的材料.而且比模型店便宜很多..
8#
Skipper 發表於 2011-3-6 22:16:13 | 只看該作者
Radar only have one kind of very thin plywood, I guess it is 1.6 mm (1/16") thick plywood, others are balsa, not suitable for model boat. The timber shop in Mong Kok have 1/8" plywood, for interior decoration use, the finish of the plywoods are very "rough".

I just wish to find some 1.6 mm (1/16") and 3.2 mm (1/8") plywood, with white/smooth surface on both sides in last week for my wooden boat, but failed.

If any C-Hing know where can find this, Please tell me also!
9#
andygoody 發表於 2011-3-7 10:09:25 | 只看該作者



    There are lots of timber shops in Lockhart Road, Wanchai.  You may try
10#
Skipper 發表於 2011-3-7 18:47:40 | 只看該作者
There are lots of timber shops in Lockhart Road, Wanchai.  You may try
andygoody 發表於 2011-3-7 10:09



Sure will go to Lockhart Rd in this Friday/Saturday!   
Thanks you for your information.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-2 09:27 , Processed in 0.067437 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表