Axial SCX10 (Tekin esc motor combo)

truckman 發表於 2011-5-25 00:54

                               
登錄/註冊後可看大圖

回復 ikesan 的帖子

mx club 遲d 有scx10 d parts............

SCX10 誇張到入mx club 玩?!

欣賞你d攝影技術多dd

Ching 點解唔換頭尾擔？
同明明見你買左vanquish D鉛,已為你行vanquish pro DH wheel添
Ching 你係咪有部xr10？

Changing to metal axles?  Not until I break the plastic ones.

I have a xr10, the vanquish bullets are for the xr10.

ikesan 發表於 2011-5-25 00:13

                               
登錄/註冊後可看大圖

借問声套 rear 4 links system邊樹有得買？

4 link mount comes with the kit, free of charge.

the 4 x rear bent link rods are 3 racing parts, $100 at RCmart,

u need a 45mm M3 screw for mounting the link rods at the mount too.

cheap mod, but effective.  Better articulation achieved.  And I notice the torque twist reduced too.

There is a metal 4 link mount in US, but very expensive so I just stay with the stock rubber mount.

wyman18 發表於 2011-5-25 01:33

                               
登錄/註冊後可看大圖

SCX10 誇張到入mx club 玩?!

they are planning to make a crawling track, nice

simon540 發表於 2011-5-25 02:40

                               
登錄/註冊後可看大圖

欣賞你d攝影技術多dd

hey, my car is also not bad

thanks anyway

回復 wyman18 的帖子

MX CLUB 遲D會有慢爬場玩

回復 truckman 的帖子

真定假呀？師兄

回復 b.woo 的帖子

sunday聽到消息

回復 rover901 的帖子

Ching 新servo 有冇set overload cut ?

回復 rover901 的帖子

Ching 用cc bec why 晤用8.4v 用盡29kg 你d 裝備甘強用盡d 好d

Thanks ching I will set the bec to release the TRUE potential of the hitech.

Thanks ching I will set the bec to release the TRUE potential of the hitech.

rover901 發表於 2011-5-25 10:40

                               
登錄/註冊後可看大圖

they are planning to make a crawling track, nice

好期待呀~
希望個場有山有水又有泥啦

wyman18 發表於 2011-5-25 22:05

                               
登錄/註冊後可看大圖

好期待呀~
希望個場有山有水又有泥啦

rover 901也訂過ax30404 架

truckman 發表於 2011-5-25 23:33

                               
登錄/註冊後可看大圖

rover 901也訂過ax30404 架

但系唔知邊到訂..

truckman 發表於 2011-5-25 23:33

                               
登錄/註冊後可看大圖

rover 901也訂過ax30404 架

I didn't order 30404 in the end, instead  I went and buy a hot racing one piece steel gear(with out drive shaft)

if u insist order the 30404, I suggest u get the steel version(in black color), which should be much stronger:

http://cgi.ebay.com/Axial-Steel- ... hash=item5ae0b439de

正 支持, 我都要整番架

thanks