請問有無人知 v16R esc 點set ga?

請問有無人知 v16R esc 點set ga?
一係我打個英文說明出黎？
大家幫我轉番做中文～
ｏｋ？
THX~~

[ 本帖最後由 pl2002hk 於 2006-9-3 21:04 編輯 ]

ｐｏｓｔ來睇睇～～～

1.Turn off the ESC by using the power switch
2.Connect the motor,battery,and receiver
3.Switch on the radio
4.Move the throttle stick to neutral position
5.Switch on the ESC(The motor will move slightly)
6.Radio throttle stick stays at neutral
7.Press'SET'button and hold until the LED Lamp turns off and the motor stops movement
8.Move the radio throttle stick to full throttle and then press the setup button(the LED Lamp will flash)
9.Move the radio throttle stick to full brake and then press the setup button(the LED Lamp will turn off)

THX~~

[ 本帖最後由 pl2002hk 於 2006-9-4 15:45 編輯 ]

help~

邊一點唔明呀~~?

紅色字～
ｔｈｘ

原帖由 pl2002hk 於 2006-9-4 15:46 發表
紅色字～
ｔｈｘ

1.Turn off the ESC by using the power switch
2.Connect the motor,battery,and receiver
3.Switch on the radio
4.Move the throttle stick to neutral position
5.Switch on the ESC(The motor will move slightly)
6.Radio throttle stick stays at neutral

1."色"左個ESC
2.將個ESC與"摩打", "接收" and "電磁" 連接
3.開着個控
4.將個油門set去中間 (唔洗move)
5.開着個ESC (個摩打會move 小小)
6.Keep 住個油門係中間 (唔洗move)

希望以上d資料幫到你 (釋得唔好,唔好介意)