RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: New ESC on my M03. [打印本頁]

作者: Tim 時間: 2006-9-5 05:14
標題: New ESC on my M03.
I thought I'd try something different, this is meant for airplanes but works fine on a mini … only one problem, when you back off the throttle the brake engages … so just don't back off

The ESC is a Rondo 600 Pro 30A made by Kontronik. It solders directly to the motor tabs, so there is only wires for the battery, no switch or setup buttons either.

作者: 雷公 時間: 2006-9-5 06:05

原帖由 Tim 於 2006-9-5 05:14 發表
I thought I'd try something different, this is meant for airplanes but works fine on a mini … only one problem, when you back off the throttle the brake engages … so just don't back off
The E ...

is the brake strong? how about putting a larger cap. to compromise the brake?

作者: ALEXANDER 時間: 2006-9-5 07:19
嘩,咁前衛既!!?

作者: ALEXANDER 時間: 2006-9-5 07:24
個轉向杯會打到麼打個位,果個"ESC"就會爛!!!

作者: Tim 時間: 2006-9-5 10:00
Yes, the brake is strong. If I adapt my driving style, not back off 100% for slow corners, but back off 50%, then the brake doesn't engage.

I haven't tried using a cap at all, do you think it would help?

I like the design of this ESC, light weight, direct solder, looks cool.

I don't like that it's harder to maintain, difficult to oil the bushing or change motors, and it's very near to the alloy knuckle so could be damaged easily.

I don't use this on my race mini, it's on my spare mini :-)

作者: paulaner 時間: 2006-9-6 00:28
So cool ...... :->

作者: wasino3318 時間: 2006-9-6 01:18
嘩，個設計概念好型喎，但係好似化學d遮，萬一比人打橫炒落去就玩完呢！師兄你覺得呢個電變反應好嗎？

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)