TeamC with Hobbywing

HW 2000Kv combo has more than enough punch for you to bash around. A well-balanced combo I recommend is Tekin RX8 + 1900/2050kv (I am using Tekin 2050kv for my MBX6 ECO and HW 2000Kv for my T8e). However, you can only get one from Tower at resaonsable price. Another option is to use HW 2250Kv 4168SD combo (I don't have one). The motor is 30g lighter and 5mm shorter but can NOT be found in KWS. In fact, I want to replace my existing HW motor by this one.

歐兄都係跟你學野姐

回復 wildbruiser 的帖子

Many thanks C Hing, your advise gave me the idea on selecting the motor and ESC.

Let see what I can get finally

Marksman 發表於 2011-8-31 20:42

                               
登錄/註冊後可看大圖

回復 wildbruiser 的帖子

Many thanks C Hing, your advise gave me the idea on selecting the motor and ...

用乜都好個摩打長度要注意，否則裝唔落就煩。

Gum記住22歲兄既提示，度下個摩打先買

1/8?

22年 發表於 2011-8-31 21:23

                               
登錄/註冊後可看大圖

用乜都好個摩打長度要注意，否則裝唔落就煩。

是的，我在前文也有看到你們的圖片，好有用

I just check the motor length of Tekin and Hobbywing. Mine currently installed (HW 4274SD) is 74MM and all Tekin motors for buggy including 1900kv and 2050kv are just 71mm. Be reminded not to choose Tekin motors for Truggy becuase the motor length is 76mm which cannot be fitted in T8e.

回復 wildbruiser 的帖子

Thanks Wild C Hing! Yes I notice the some of the model from the Tekin motors are longer in size. I think I will buy a set of Tekin RX8 with T8 buggy motor.

再簡單d講，For T8E 麼打蕊一定唔可以超過16mm.
當日我就係cut到16mm，好Fit

Update on my kit - last night I spent another 1 hour to complete the 3 differential gears, front oil #5000, center #5000 and rear #2000, just follow the additional instruction sheet added to the manual. In this additional instruction sheet they also added a washer on top of the axle rubber seal ring.

By the way, found the differential case is made of plastic, is other brand using metal case? Seem this plastic (though it is engineering plastic with fiber glass mixture) is the weakness part in this asembly.

有張 additional instruction sheet? 可否post來睇下。

回復 euro614 的帖子

Here the spec I found in their website:

Telkin Redline T8 motor
Weight: 4030: 11.5oz (341g)  4038: 14.25oz (404g)
Shaft Dimensions: 19 x 5mm w/flat
Motor Diameter: 1.57” (40mm) / 1.65” (42mm) including fin
Motor Length: 4030: 2.80” (71mm)  4038: 3.0” (76mm)

Thats mean even we choose the 4030 (71mm), we still need to cut the shaft from 19mm to 16mm right?

All diff cases of my buggies including Kyosho and Mugen (nitro & electric) are made of plastic. Only the gears are metal. Rest assure that plastic case is strong enough.

Marksman 發表於 2011-9-1 10:28

                               
登錄/註冊後可看大圖

回復 euro614 的帖子

Here the spec I found in their website:

19mm 長就一定唔得，我係cut到16mm先fit，唔high 電。

maybe spacer can help. but not sure.

等後生仔(22歲果d)報告. 我都訂左一隻2050KV, 不過係比條蛇用.

Marksman 發表於 2011-9-1 10:28

                               
登錄/註冊後可看大圖

回復 euro614 的帖子

Here the spec I found in their website:

唔係喎，Sorry，
T８個麼打係71mm long， 19mm 蕊
HW 果個係74mm long，

如果係咁，你用Team C出的麼打墊片，將個麼打移後，就可以用到。

euro614 發表於 2011-9-1 10:48

                               
登錄/註冊後可看大圖

唔係喎，Sorry，
T８個麼打係71mm long， 19mm 蕊
HW 果個係74mm long，

歐兄終於悟出大道理. . .善哉 . . .善哉

係咪今日係9月1日開學日呢，個個早上咁得閒既？