玩DRIFT用頭牙差尾直,有冇問題呢??

小弟架DRB用頭珠差尾直,想換BD5個牙差落車頭代替珠差,以減少維修
有冇師兄用呢個SETTING??  各師兄可唔可以俾D意見我??  
Thx !

anyone can help ?

It could work, but may have to use very thin diff oil like #500 and make sure it does not leak!!

fatchickterian 發表於 2011-6-7 11:43

                               
登錄/註冊後可看大圖

It could work, but may have to use very thin diff oil like #500 and make sure it does not leak!!

咁會唔會仲麻煩過用珠差??

nikeid 發表於 2011-6-7 11:56

                               
登錄/註冊後可看大圖

咁會唔會仲麻煩過用珠差??

Well, I'm not sure too, never try it before!!  Sorry can't help!!

fatchickterian 發表於 2011-6-7 12:12

                               
登錄/註冊後可看大圖

Well, I'm not sure too, never try it before!!  Sorry can't help!!

C-hing , u also using 珠差 ??

buy why don't u use one-way for front ???

s.y.kwok 發表於 2011-6-7 22:20

                               
登錄/註冊後可看大圖

buy why don't u use one-way for front ???

one-way,我之前架tt-01都用,但架車總係好似好難控制,好易打白鴿轉

nikeid 發表於 2011-6-7 12:37

                               
登錄/註冊後可看大圖

C-hing , u also using 珠差 ??

Yes, I use ball diff in front and spool at the back.

I set my ball diff very loose, which I think, feels good!

Front one way is good too!!

回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

回復 s.y.kwok 的帖子

係呀！將會玩CS2.0, 咁我應點做，。？

回復 fatchickterian 的帖子

sorry, wt is "spool" ??

nikeid 發表於 2011-6-8 12:20

                               
登錄/註冊後可看大圖

回復 fatchickterian 的帖子

sorry, wt is "spool" ??

Rear Spool = 尾直

s.y.kwok 發表於 2011-6-8 11:54

                               
登錄/註冊後可看大圖

回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

C-hing , here ma ??
如果我將會玩CS2.0, 咁我應點做，。？

s.y.kwok 發表於 2011-6-8 11:54

                               
登錄/註冊後可看大圖

回復 nikeid 的帖子

咁你係唔係唔打算玩cs?

如果用左ONE-WAY,45.5MM的頭萬向洗唔洗換??

nikeid 發表於 2011-6-9 14:28

                               
登錄/註冊後可看大圖

如果用左ONE-WAY,45.5MM的頭萬向洗唔洗換??

okay gei,is use 45.5mm

thx a lot, c-hing