Rock Crawler 慢爬

宏, are those the maxx braces I see as the chassis? Very clever!

orange00, where did you get that Scion body and what chassis is it for? I love Scion!

My Car

我都post下啦！
My G-made Clod

好靓仔呀!你地有时间返大陆度假就带埋部车上来一起玩拉!好想认识下大家呀!

原帖由 Jackson 於 2006-9-15 08:40 發表
orange00, where did you get that Scion body and what chassis is it for? I love Scion!

It's TLT-1 Chasis with ABC CUBE (Copy version)

原帖由 zls 於 2006-9-15 10:38 發表
好靓仔呀!你地有时间返大陆度假就带埋部车上来一起玩拉!好想认识下大家呀!

有無地方差電
或者你過來香港時也帶你的車一起吧.

我又曬

                               
登錄/註冊後可看大圖

仲幫老友食環署曬埋

                               
登錄/註冊後可看大圖

各車詳細資料

原帖由 orange00 於 2006-9-15 10:51 發表

有無地方差電
或者你過來香港時也帶你的車一起吧.

我拖个大电瓶过去~慢慢叉都得拉!不过真系好想下次过去带埋车!

原帖由 mikewu 於 2006-9-15 00:20 發表


Is that "friend" of yours name "James"....  
I suggest to use Clod Buster's axels since there are more kits for the Clod then TXT....

Hi Mike,
Yes you're right.
All bor's crawlers were so great.
I've seen the website, all the motor for crawler should be use 44T~55T at US$20~25.
What motor should be use on yours crawlers?
Thanks your advise.

原帖由 Jackson 於 2006-9-15 08:40 發表
宏, are those the maxx braces I see as the chassis? Very clever!

orange00, where did you get that Scion body and what chassis is it for? I love Scion!

Yes, thanks!
I used 2 sets maxx braces become my Crawler chassis...
I think this is easily to build the chassis..

原帖由 fyin 於 2006-9-15 23:39 發表


Hi Mike,
Yes you're right.
All bor's crawlers were so great.
I've seen the website, all the motor for crawler should be use 44T~55T at US$20~25.
What motor should be use on yours crawlers?
...

Really?  You two wants to get into the crawling business huh!  That's gooooooooood...!
Anyway, most people use 55T motors for the highest climbing power.  But of course, there are 70T or 75T motors that's even more powerful but you'll get sick and tired of going "SUPER SUPER Slow" instead of "Super Slow" for the 55T already....
I use Inteagy products myself for the crawler.  In fact, you can check out Chee Lok since they always claims that they are producing a crawler kit of their own brand.

Hey, when do you guys go to MMS lately?  I have been there 2 weeks in a row but I went on Wednesdays... You still going Tuesdays?

We can go to MMS on Tue or Wed, Will you go on next Wed?
We have 4 guys to run MB4 and james had 2 more mini buggy, frog & mini-T.
See u on next Wed.

原帖由 fyin 於 2006-9-16 13:11 發表
We can go to MMS on Tue or Wed, Will you go on next Wed?
We have 4 guys to run MB4 and james had 2 more mini buggy, frog & mini-T.
See u on next Wed.

Wait wait wait wait wait... I might not make it this coming Wednesday...  but I'll try Wednesday after....  These days I am playing with a guy who are just crazy about Mini Ts...  And I am with my old friend MB4..

Brothers ...... I just want to show you this Fully Custom 2.2" Class Crawler that was built by my friend ... RC_Guru ...  in Thailand.

Stick design that has the main piece made from Stainless Stell tube that was left over from making the Fence around the house.
The rest was fab from aluminium plate to hold up the Gearbox that took from the old Tamiya Dyna Blaster.
What you see now is the first try that has not been test-run yet.

Here we go ....

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

concept is same as the US"s crawler "STICK"??
Great job

Wa, it should be very very heavy one.

原帖由 orange00 於 2006-9-19 13:02 發表
Wa, it should be very very heavy one.

No, it's not heavy at all.  
In fact this stanless steel tube is very thin and lighter than aluminum tube which has the same outer diameter. So the most heavy thing that hang up there is the Motor. But I will wait for his Test-run report comes out and let you know again.

原帖由 rockdragon 於 2006-9-19 13:51 發表



No, it's not heavy at all.  
In fact this stanless steel tube is very thin and lighter than aluminum tube which has the same outer diameter. So the most heavy thing that hang up there is the ...

That's a very nice crawler.. thanks for sharing... and one thing that's for sure about this crawler.... it's easy to carry......