BMS ANDRE-B - 1.5 years project 86% complete

自由人 發表於 2012-1-3 16:19

                               
登錄/註冊後可看大圖

船軸 同 船陀落雪油..( 甲板 同 座樓 封得好,已經唔會點入水.,,比人撞沉除外...)..一般將電子野升起就 ...

Yes, you are right again.. i know .. but i really fear "比人撞沉除外" hahaha
yes, i really need to test how hot heat sink generated...

JerryLeung12 發表於 2012-1-3 16:55

                               
登錄/註冊後可看大圖

Yes, totally right.. but i need to place e;ectrical,parts in center and heavy tank in stern deck

哦,,仲有野放船尾,,, 你堅整 BB 彈鎗捉鯊魚............

JerryLeung12 發表於 2012-1-3 16:56

                               
登錄/註冊後可看大圖

Yes, you are right again.. i know .. but i really fear "比人撞沉除外" hahaha
yes, i really need t ...

慢慢試到好為止........

             原來係情歌王子 ---------->>

登錄/註冊後可看大圖

自由人 發表於 2012-1-3 17:49

                               
登錄/註冊後可看大圖

原來係情歌王子 ---------->>

你都應該學番樣樂器調節吓...例如吹嘯啦,吹口琴啦,吹喇叭啦,吹小号等等...

Q太郎 發表於 2012-1-3 20:08

                               
登錄/註冊後可看大圖

你都應該學番樣樂器調節吓...例如吹嘯啦,吹口琴啦,吹喇叭啦,吹小号等等...

我,,我都識少少吹.................牛..嫁.....

自由人 發表於 2012-1-3 21:50

                               
登錄/註冊後可看大圖

我,,我都識少少吹.................牛..嫁.....

勁....

Q太郎 發表於 2012-1-3 23:14

                               
登錄/註冊後可看大圖

勁....

我訓先...晚安..88

自由人 發表於 2012-1-3 23:17

                               
登錄/註冊後可看大圖

我訓先...晚安..88

good大你個奶...

START DECK...

登錄/註冊後可看大圖

     快D手啦....唔係新年冇船玩...好可憐嫁.........

自由人 發表於 2012-1-10 11:17

                               
登錄/註冊後可看大圖

快D手啦....唔係新年冇船玩...好可憐嫁.........

Ei~~~
Next problem is this time i use Mixer (buy from england), but my futaba tramsmiter use FMASS 2.4G will influence the signal and need update the program in IC RAM.............

I like Mixer, but very difficult to setup and easy to burn the motor....

JerryLeung12 發表於 2012-1-10 11:46

                               
登錄/註冊後可看大圖

Ei~~~
Next problem is this time i use Mixer (buy from england), but my futaba tramsmiter use FMA ...

咁點搞呢......新年冇船玩......

自由人 發表於 2012-1-10 11:48

                               
登錄/註冊後可看大圖

咁點搞呢......新年冇船玩......

I will temporary setup the RAM by myself, but maybe need use fast speed to move the TUG---- very ugly...
Futaba tramsmitter after 6EX model, lots of problems in 2.4G system, i hate it, they will generate overlap signal to confuse the receiver....

JerryLeung12 發表於 2012-1-10 11:50

                               
登錄/註冊後可看大圖

I will temporary setup the RAM by myself, but maybe need use fast speed to move the TUG---- very u ...

用返 FM 控.....

自由人 發表於 2012-1-10 11:52

                               
登錄/註冊後可看大圖

用返 FM 控.....

HAHAHA, i sell all FM controller la...

JerryLeung12 發表於 2012-1-10 11:56

                               
登錄/註冊後可看大圖

HAHAHA, i sell all FM controller la...

買囉,,好平之麻......

自由人 發表於 2012-1-10 11:59

                               
登錄/註冊後可看大圖

買囉,,好平之麻......

I modify the program law and this time i try " Inward turning props for propeller set" , common set is set as " outward turning" try try will it damage my new tug. HO HO HO

Common method is that: more efficient and faster, but in Tuen Mun Pool, lots of rocks, so i try inward turning...

登錄/註冊後可看大圖

JerryLeung12 發表於 2012-1-11 16:23

                               
登錄/註冊後可看大圖

I modify the program law and this time i try " Inward turning props for propeller set" , common se ...

隻拖船 車葉唔係有個 ( 剛 ) 咩....??? 內外轉都冇分別啦....

自由人 發表於 2012-1-11 16:28

                               
登錄/註冊後可看大圖

隻拖船 車葉唔係有個 ( 剛 ) 咩....??? 內外轉都冇分別啦....

Lots of people think that... NO ga
Outward turn -- faster and stable, but lots of noise (Lot of Air) - save energy (battery)
Inward turn -- can very stable when slow movement but not efficient in fast move, and use lots of energy, but can little noise

Ship is that... lots of theory , good for our try.. so my tug use so long time building , very interesting..