Team Durango Dex408

好正 ar

52x 發表於 2011-12-13 19:05

                               
登錄/註冊後可看大圖

一小時耐力賽要換4次電，每組4S 5200mAh容量的電池約可以跑13分鐘。

乐桦发狂跑才13分钟。你跑20分钟也够

eugene.C 發表於 2011-12-20 00:18

                               
登錄/註冊後可看大圖

乐桦发狂跑才13分钟。你跑20分钟也够

我一早自首了，我差少少可以跑到廿分鐘，但全程要不用迫力

such a good car with unique design

nice buggy

正式開工

首先

登錄/註冊後可看大圖

Good Job!

我想問問我應該用佢原本TEKIN 12 AWG
定係用10 AWG好?

登錄/註冊後可看大圖

回復 coolcooleric 的帖子

Big6 10AWG is too thick, not necessary and not fits the slim design of your nice buggy. Just use the Tekin 12AWG. Good Enough!!

回復 wildbruiser 的帖子

甘插電個條都係用12 ? 聽人講插電個兩條紅黑用10AWG.

釣勝於魚!

真係冇花冇假22號開工喎！快d完工入級比我地欣賞下。

回復 coolcooleric 的帖子

The choice of wire largely depends on the current. You may think that the wire acts like water pipe. The larger the current, the thicker the wire. In my opinion, there should be no advantage to use thicker wire for connecting the battery if you have thinner one in the circuit. 12AWG should be enough for 1/8 RC.

This is only my opinion and may not be completely correct. I can only tell you that I have tried both Big6 10AWG, Big6 12AWG, Tekin 12AWG and mix of them. No obvious difference on performance but Tekin 12 AWG should be lighter than Big6 wire. In fact, I have bought 50 feet of Tekin 12AWG wire already...

re ben  
沒有其他意思的,
just that i like the building process, just want to do the best i can
sorry for any hard feeling!

coolcooleric 發表於 2011-12-22 13:40

                               
登錄/註冊後可看大圖

re ben  
沒有其他意思的,
just that i like the building process, just want to do the best i can

Eric兄好比心機搞部車，期待大作0向MX落場時一睹佢0既雄姿。 不過你問著哩度班大財主個答案永遠係............................................爛左壞左唔好用有問題就買過另一舊。佢地最緊要有得玩。

If your soldering skill is not good, stick to 12AWG. It is hard to solder 10AWG to the Tekin ESC neatly. Some high hand here screwed the ESC with Cow {banned} Soldering Point

<< 22年  大米乳入手電線每手最少50尺~~~~  >>
又新名

回復 wildbruiser 的帖子

My soldering skill sucks ! So I'll stick with 12 awg
Thank!

差點第一張圖就整錯

左邊係29.5mm      右邊個4個係28.5mm

登錄/註冊後可看大圖

司兄加油!!
期待你的作品...