我的t2r

原帖由 raymondnam 於 2006-10-5 23:40 發表


gear ratio = 齒比 ????

Yeah! I'm using 48ptich 84th / 14th.

原帖由 Chrispo 於 2006-10-5 23:46 發表



Yeah! I'm using 48ptich 84th / 14th.

我用 87th/14th,有冇問題???

Since your internal ratio is 1.7, your final gear ratio is 10.56. It seems like the top speed is not that much. You may not find the car running very fast at full speed (you may hear other brothers saying 4.5R is very fast.) However, you will have tons of acceleration when going out of the corner. Since you have to balance the handling of the car and acceleration from the 4.5R when coming out of the corner, eventually you may find your T2R a bit slower as a whole.

I think if you are driving brushless 4.5R for the first time, it's still fine. Ask if you have friends with a temperature gun and test the temperature of the motor, make sure that it's not overheating.

is it plastic shock?

原帖由 ALEXANDER 於 2006-10-5 23:23 發表
D電線................

咁 "長" 嘅 !?!?!?.........

7/10
今晚有冇人o係東區放車????
放車時有什麼要注意及規矩呢???
大家主要會帶d乜???(除左車&控)

Ko 2413 servo...
how much ar???

原帖由 rcdummy 於 2006-10-8 00:24 發表
Ko 2413 servo...
how much ar???

唔明????

原帖由 Chrispo 於 2006-10-6 00:31 發表
Since your internal ratio is 1.7, your final gear ratio is 10.56. It seems like the top speed is not that much. You may not find the car running very fast at full speed (you may hear other brothers ...

太快都冇用,我現時技術有限,控制唔到 ,遲d叻d先改,thx

銅鑼灣???? where???? 銅鑼灣have place can play??

you can try 84/ 20 or more...

原帖由 RC 於 2006-10-8 18:00 發表
銅鑼灣???? where???? 銅鑼灣have place can play??

冇

T2R dampers are metal or plastic?

原帖由 GigaRacer 於 2006-10-11 14:42 發表
T2R dampers are metal or plastic?

plastic

Any T2R update/report yet?  

still testing

原帖由 raymondnam 於 2006-10-12 22:35 發表
still testing

fast?  very fast?  faster than you can control?  

easy to control
only play one times