全改ta05

hello,第一次發貼,正改ta05 ,3 racing 炭板,金屬前後波箱,金屬中波箱,頭單,carbon前後油壓,金屬c座,金屬轉向,4個金屬前後臂碼,tamiya金屬油壓,金屬轉向碼,Tamiya blue带,前萬向,前後桿,正搞搞成會post photo

please note the price is lower than TB5,
also including parts.......... no list above
hope i can finish it asap.

anyone can tell me where i can play. i live in hk island. where i can play? thks.

原帖由 chan_ka_Lung 於 2006-10-27 23:13 發表
anyone can tell me where i can play. i live in hk island. where i can play? thks.

If you have Private car you can consider PYC(Sheung Shui) or TC(Yuen Long)

原帖由 chan_ka_Lung 於 2006-10-27 23:13 發表
anyone can tell me where i can play. i live in hk island. where i can play? thks.

香港島得一個RC場,係灣仔天橋底,近紅隧出入口果堆天橋下面.

但油份極多......相信你O架全改TA05會變泥鴨.

有車就梗係去O的PYC呀,TC之類啦.....

冇的話,咪搵下有冇O的籃球場呀,足球場呀,晚上放下狗囉.....

Hello Bro. Chan_Ka_Lung,

Cheaper than TB5?  Would you mind list out the cost for each option?  I'm very interested to know the cost.  It seems quite attractive.

原帖由 chan_ka_Lung 於 2006-10-27 22:37 發表
please note the price is lower than TB5,
also including parts.......... no list above
hope i can finish it asap.

原帖由 AMAT 於 2006/10/27, 23:57 發表


香港島得一個RC場,係灣仔天橋底,近紅隧出入口果堆天橋下面.

但油份極多......相信你O架全改TA05會變泥鴨.

有車就梗係去O的PYC呀,TC之類啦.....

冇的話,咪搵下有冇O的籃球場呀,足球場呀,晚上放下狗 ...

但沒油比有油更冼啊= ="

用gpm出的綿胎叫做比較好d

Where about do u live in HK island.
I have a TA05 N i live in HK island as well.

I don't think 全改 ta05 will be cheaper than TB evo 5.

Now TB evo 5 only cost HK$2400, and it is almost full option. Also 415 MSX MRE cost around HK$3000.
I also have a Ta05. I just 半改 (no 3 racing 炭板,金屬前後波箱, etc) and it already cost more than HK$3000. Unless you got a HUGE discount on 3 racing part, I will go for 415 MSX MRE

hello all, thanks all
if you use all Tamiya original part, the car will very expensive.
Recent, i find some part in TOPXXX, the part is cheaper than original part. the price of TOPXXX is around half price .please go to KWS see...see...
I will use some part which is buy from topXXX. The part quality is good. Not bad compare with Tamiya original. I will try best to finish asap and photo to every one.
now, i really use the money less than tb5.

西環

Now i think use TA05 to make the 炭板 professsional car is better. It is beacuse i will have more plastic replacement part on hand.

i don't know why. If i buy any part, i will search where is the cheaper part?
金屬頭單 有一間是最平的...please go to fins in KWS. please note it is Tamiya original part, not 3 racing.

if buy more, we can ask for cheaper price MA.....

Recently searching, around 3-4 company in KWS has cheasper part for ta05 option part. so i buy all part in these 3-4 cmpany.

hope can help all ta05 fans...........

原帖由 petscan 於 2006-10-28 09:47 發表
I don't think 全改 ta05 will be cheaper than TB evo 5.

Now TB evo 5 only cost HK$2400, and it is almost full option. Also 415 MSX MRE cost around HK$3000.
I also have a Ta05. I just 半改 (no 3 ...

agree

原帖由 chan_ka_Lung 於 2006-10-28 22:03 發表
hello all, thanks all
if you use all Tamiya original part, the car will very expensive.
Recent, i find some part in TOPXXX, the part is cheaper than original part. the price of TOPXXX is around h ...

Please don't mind, In my opinion, TOPxxx part is not good!

ｔａ－０５唔好大改啦～～

thanks fo your comment....maybe....but i don't know still now...need to test it later.....but at this time...i feel 堅硬度, 精密度, weight seem not bad than tamiya original....
Now, I have about half tamiya original part use.