DEX408 all ready...

砌完覺得點?

What is the space between the motor and battery?

注意車架在跳落地時會微曲。車殼後開孔應是長橢圓。如果按樓主用正圓孔，車殼好快要報廢。

嘩！黄色戰衣

lcman 發表於 2012-8-6 12:46
注意車架在跳落地時會微曲。車殼後開孔應是長橢圓。如果按樓主用正圓孔，車殼好快要報廢。 ...

我從來都唔開circle hole

Lotus 發表於 2012-8-6 12:21

                               
登錄/註冊後可看大圖

砌完覺得點?

with alot of HAND PAIN...

mlee 發表於 2012-8-6 12:26

                               
登錄/註冊後可看大圖

What is the space between the motor and battery?

Around 1mm

DK666 發表於 2012-8-7 11:44

                               
登錄/註冊後可看大圖

Around 1mm

Quite tight tolerance...  Would pay more attention to this to avoid Litho battery explosions...

52x 發表於 2012-8-6 15:13

                               
登錄/註冊後可看大圖

嘩！黄色戰衣

Most of my R/C's bodies are the same pattern like the Camaro SS(Bumble Bee Version)

mlee 發表於 2012-8-7 11:47

                               
登錄/註冊後可看大圖

Quite tight tolerance...  Would pay more attention to this to avoid Litho battery explosions...

Well, can't do JACK if you want 550 Size Motor cause of the size...

DK666 發表於 2012-8-7 11:51

                               
登錄/註冊後可看大圖

Well, can't do JACK if you want 550 Size Motor cause of the size...

try add spacer between motor and holder? Maybe?  

mlee 發表於 2012-8-7 13:48

                               
登錄/註冊後可看大圖

try add spacer between motor and holder? Maybe?

that'll fix the problem. but becareful that the motor might get loose ALOT MORE FASTER cause that happened to me when I was back at the State...

DK666 發表於 2012-8-8 11:01

                               
登錄/註冊後可看大圖

that'll fix the problem. but becareful that the motor might get loose ALOT MORE FASTER cause that  ...

Large size of the spacer would ease the situation.

mlee 發表於 2012-8-8 19:54

                               
登錄/註冊後可看大圖

Large size of the spacer would ease the situation.

Yes, but for the DEX408...if you add spacerit'll fix the shaft hitting battery problem....but then another problem come out...motor end will hit the servo saver unit(steering unit)