Vintage 1/12 PB Demon

tiger1 發表於 2012-8-24 23:38

                               
登錄/註冊後可看大圖

the second version upper deck is VERY handsome

二樓板個形有D似戰鬥機

我覺得好似兩個人係度舉重；左邊果個（mark）大個口（艾）曬咁舉，而右面果位就忍住度氣係咁谷。  ^_^

cfchung has a good description

tiger1 發表於 2012-8-25 13:50

                               
登錄/註冊後可看大圖

cfchung has a good description

thx ching!

cfchung 發表於 2012-8-25 19:30

                               
登錄/註冊後可看大圖

thx ching!

師兄D比喻十分正斗

睇得奧運多喇

爭取RC成為奧運比賽項目.........!(執車戰快)

好，RC 入巴西2016！

tiger1 發表於 2012-8-26 01:23

                               
登錄/註冊後可看大圖

好，RC 入巴西2016！

support support

加埋噴殼入2016啦。指定動作，自選花式、個人、隊際。男子組，女子，單項、個人全能。

Though PB International was made in UK, I used to wonder if there was any business/design/ production between PB and Hobby World 奇趣屋in those years. Say, the plastic parts of PB looks filmsy, and the rear motor pod of Demon 12 looks very similar to the lexan bath tub 1/12 by Hobby World.....  Can someone talk about these?

polarbear 發表於 2012-8-28 14:10

                               
登錄/註冊後可看大圖

Though PB International was made in UK, I used to wonder if there was any business/design/ productio ...

師兄，是否講用lexan 做車架(透明車架)果两部？

好像叫乜乜Turbo T

macau-rc 發表於 2012-8-28 23:52

                               
登錄/註冊後可看大圖

好像叫乜乜Turbo T

我年資太淺，未聽過呢架

polarbear 發表於 2012-8-28 14:10

                               
登錄/註冊後可看大圖

Though PB International was made in UK, I used to wonder if there was any business/design/ productio ...

agree, I remember they at 奇趣屋 made some red plastic parts before

tiger1 發表於 2012-8-29 00:40

                               
登錄/註冊後可看大圖

agree, I remember they at 奇趣屋 made some red plastic parts before

Yes, that's what I said. Hobby World said they used Du-Pont industrial thermal plastics  etc...
The PB parts were not as muscular as the USA's Associated , and not that professional look as SG, always looks like toys...
I remember Nikki Kwong was the PB 1/8 driver (4wd, IS series, before pheonix) for a while. The transmission consisted of piles of nylon gears, it was Dangerous to the fingers of his mechanic (once for me, other was" 泥工榮") .

polarbear 發表於 2012-8-28 14:10

                               
登錄/註冊後可看大圖

Though PB International was made in UK, I used to wonder if there was any business/design/ productio ...

當年 奇趣屋自制的 Turbo T 12仔，所採用的紅色膠料質量很差。

agree, poor plastic....

可能真係旗脆屋幫PB做0EM都未定。當年仲係英國佬揸Fit，香港又大把啤膠廠。不過當年奇趣屋D嘢就有D奇，9唔搭八嘅都大把