Thanks ching.
Can you suggest turbo and boost setting for new hand in jv? I use ss0 and tp 9.5t. ...
what brand of motor u using??
coz of they hv difference characteristics.
u can try 20 boost 18 turbo first.
run 2mins,check it temperature.
if lower than 60degree.than run 5 mins more.than check
better keep it below 80 degree finally after run 8 mins(a pack of battery)
if u find it not fast enough for u.
add the value by 2 every time either boost/turbo
(boost for acceleration.turbo for top speed).
and repeat to check the temperature again
by the way,i dun prefer the new hand concent about "speed" first.
better keep it no boost/turbo b4 u got the right setting,right grip & racing line.
hope can help
Appreciate and agree SY ching.
I started with HW EZrun 60a + 8.5T sensorless 3 months ago. I used 19T pinion gear initially and increased one T when I felt I could get control of the car reaching 23T now.
I am trying different settings, tires and to manage to stay in the same running line, which was difficult initially and still sounds a bit challenge now. I keep learning.
Now I just bought the Extreme stock esc + team power 9.5T(old version) and will try your suggestion as a start. Thanks again.
Appreciate and agree SY ching.
I started with HW EZrun 60a + 8.5T sensorless 3 months ago. I used 19 ...
just a suggestion to make your race more efficiency.
not teaching.i'm just a player,too
in my experience,accurate racing line can make faster lap time than higher speed of the car does.
all of my "rc mate" @ jv are playing with 10.5T motor only.
hope can meet u at jv & play together