TA05 Street Run

Is there any hop-up to cover up the spur and pinion gear?  Or even the bulk head?  I have to take the car up-side-down to empty the little stones because it jam the gear and make loud noise....

I also see some slight marking/damage on the spur gear...

掃齒???

TA05掃齒，唔係呀，得果幾個齒點掃呀。。。

好正常, 入石仔,沙仔引致掃齒

Not 掃齒... but some little stones made some marking on the teeth.  And for sure something went inside.  Some abnormal noise.  



Dirty parking lot

原帖由 GigaRacer 於 2006-11-18 01:57 發表
Not 掃齒... but some little stones made some marking on the teeth.  And for sure something went inside.  Some abnormal noise.  



Dirty parking lot

仔細O的睇,挑咗係大齒或摩打齒上面攝實O既石仔出嚟就唔會再有事.

too late.... the noise is confirmed coming from the spur and pinion gear.  Seems need to change both.  

In order to prevent this happen again.... here is my DIY solution

有創意, 我鍾意

hi, if you take a look at the chasis, there is a slot right below the 'big teeth', you can put a sticker to cover the slot and the problem will be fixed, the stone is actually come from below, not from the top.  Unless you will change to a bigger diameter one, the sticker will not affect the spinning of the teeth.

防水呀~?

原帖由 SPOONACCORD 於 2006-11-20 14:38 發表
防水呀~?

潛水呀

劲啊，金钟罩

原帖由 lihou 於 2006-11-19 22:36 發表
hi, if you take a look at the chasis, there is a slot right below the 'big teeth', you can put a sticker to cover the slot and the problem will be fixed, the stone is actually come from below, not  ...

I will tape the bottom too.  Haven't bought the gears yet, so can't test run it.

整個波波頂比佢 ... ~我覺得d 野係係下邊果個孔入去....
我都試過挑番粒 鐵屎 咁既野出黎 !
一挑左出黎 ~又順番 不過d 聲都係差少少

Here is the updated picture.  I bought a new Robinson 48pitch spur gear and Robinson extra hard pinion gear for it, but..... it still doesn't sound very smooth

What's going on?  I opened both bulk head, and checked all dog bones....  

forgot to include the picture

I am using Sorex r32..... seems not very good for street run.  Or it could be my setting?  What tires are good for street run?  有文 or 沒文?