lunch box 個wheel 一問

我最近先有時間砌完架車 , 個頭呔出現positive的Camber Angle　如圖　
是否正常 , 我照足說明書指示的應有長度 , 唔係咪仲係較到有d過長呢
咁正常應該係與圖相反 , 定係兩者中間呢
唔該哂 咁好多位師兄

一句”唔好對佢要求咁高”　完

原帖由 海畢 於 2006-11-21 01:29 發表
我最近先有時間砌完架車 , 個頭呔出現positive的Camber Angle　如圖　
是否正常 , 我照足說明書指示的應有長度 , 唔係咪仲係較到有d過長呢
咁正常應該係與圖相反 , 定係兩者中間呢
唔該哂 咁好多位師兄

正常的 , 架架lunch box都係咁 !

正常的

this setting will have better cornering. trust me....

by the way...this is not the camber angle....it's toe-out.....
this can can't have a camber angle...the single swing arm will vary the camber angle anytime....hahaha

by the way...this is not the camber angle....it's toe-out.....
this can can't have a camber angle...the single swing arm will vary the camber angle anytime....hahaha

原帖由 vr2uhu 於 2006-11-21 10:46 發表
by the way...this is not the camber angle....it's toe-out.....
this can can't have a camber angle...the single swing arm will vary the camber angle anytime....hahaha