復活禮物 Tamiya Tundra

billychan 發表於 2013-4-4 08:13

                               
登錄/註冊後可看大圖

說明書建議用Analog, 因遙控上微調在MFC-02上很重要,撻車,死火,警告燈,高低灯,全都用微調控制. ...

仲有吊極力子果下真係好過癮。

師兄請問点吊極力子?

nismokin 發表於 2013-4-4 21:11

                               
登錄/註冊後可看大圖

師兄請問点吊極力子?

Ch3拉落黎係極力子，小心彈極力子射左部車埋牆。

2.4G棍控呢？ MFC-02 ok?

2.4G 當然ok!
我用緊JR DSX7, 不過最好要兩邊都有回中彈弓

可以參考下
http://www.rc-daily.com/forum/forum.php?mod=viewthread&tid=6788

Allan007 發表於 2013-4-4 18:01

                               
登錄/註冊後可看大圖

仲有吊極力子果下真係好過癮。

對,因為吊極力子,唔使用微調,所以冇寫.

Allan007 發表於 2013-4-3 11:59

                               
登錄/註冊後可看大圖

MFC-02只可以用有刷，但其實白豬行到三波都好快，你甚至會考慮買隻50-60T有刷如果你想玩"慢爬"，買棍控最好 ...

Hi Ching, I'm new to RC. Just wanna confirm that 槍控 can be used for Tundra? thx for your reply.  

Kelvin1728 發表於 2013-4-27 08:45

                               
登錄/註冊後可看大圖

Hi Ching, I'm new to RC. Just wanna confirm that 槍控 can be used for Tundra? thx for your reply.  ...

If you have a plan to install MFC-02, you should use 棍控 with mechanical trimmers as MFC-02 is designed for such 控.  But if you plan to build a 山豬, which cannot have MFC-02 installed anyway, then in my opinion 槍控 is better because I can configure the 3rd channel to shift the gears like a Tiptronic gearbox.

Allan007 發表於 2013-4-27 09:29

                               
登錄/註冊後可看大圖

If you have a plan to install MFC-02, you should use 棍控 with mechanical trimmers as MFC-02 is de ...

thx ching.

I don't need any sound at all, so better go for 槍控 for Tundra then. thx again for your advice.