CRC XTI WITH JACO WHEEL ^^

hlsk 發表於 2013-4-17 23:11

                               
登錄/註冊後可看大圖

終於見番正常野哪.  唔會再係肥仔呔  都好想欣賞下閣下点樣玩 12仔學下野.   ...

研究下

garywong5368 發表於 2013-4-18 01:01

                               
登錄/註冊後可看大圖

請問是否要指定-細servo?

最好用sanwa94761size的servo

12仔 慢速行駛 at jv 正常計 12仔快過4.5T火箭Touring至係

RoyaleM3 發表於 2013-4-18 16:28

                               
登錄/註冊後可看大圖

I go on Sunday mornings when there is no rain

有機會影啲相睇

1BM 發表於 2013-4-18 17:14

                               
登錄/註冊後可看大圖

12仔 慢速行駛 at jv  正常計 12仔快過4.5T火箭Touring至係

對哦， 部車只要裝10.5T motor,已有4.5T房車速度。

12仔慢行, 太失威了 , 應該狂lap 火箭至系

billgate803 發表於 2013-4-18 17:09
我用13.5t trinity motor,您7.5t 行幾 cell?

2 cell

RoyaleM3 發表於 2013-4-18 18:48

                               
登錄/註冊後可看大圖

2 cell

試左車未, 電變用幾多A , 有無TURBO
7.5T MOTOR, 如齒比車胎配搭得好, 速度很驚人

billgate803 發表於 2013-4-18 19:24
試左車未, 電變用幾多A , 有無TURBO
7.5T MOTOR, 如齒比車胎配搭得好, 速度很驚人
...

Not yet.
Only bought a Kp servo saver on Sunday.
Will test drive on a Sunday when the weather is dry.

Team powers 70a.
With turbo.

RoyaleM3 發表於 2013-4-19 00:42

                               
登錄/註冊後可看大圖

Not yet.
Only bought a Kp servo saver on Sunday.
Will test drive on a Sunday when the weather is d ...

M3 兄，遲啲試左車，分享下心得和相片，現在大家玩xti就是
自己友

billgate803 發表於 2013-4-19 12:29

                               
登錄/註冊後可看大圖

M3 兄，遲啲試左車，分享下心得和相片，現在大家玩xti就是
自己友  ...

Sure !!!!!!!!!!



I played with s120 before.....there was not enough rear grip.  I sold it.

I tried a C hing's CRC at jv.  He played 3 cell (8.5t or 10.5t I can't remember).....

It was very 'ging'.  So I bought CRC.

Also, I'm going to try speed mind tyres.  Super soft rear and soft front.

billgate803 發表於 2013-4-19 12:29

                               
登錄/註冊後可看大圖

M3 兄，遲啲試左車，分享下心得和相片，現在大家玩xti就是
自己友  ...

I also have VBC F1 to try !

RoyaleM3 發表於 2013-4-19 19:08

                               
登錄/註冊後可看大圖

I also have VBC F1 to try !

Yeah!!!正啊，   f1 打算用vds殼嗎，abc 有隻vds殼好壓風，不過要裝埋其崩把和闊殼柱板

billgate803 發表於 2013-4-20 12:30
Yeah!!!正啊，   f1 打算用vds殼嗎，abc 有隻vds殼好壓風，不過要裝埋其崩把和闊殼柱板 ...

I'm only going to use my old 104 shell ja. 104 shell not good ?

Will look into vds sin.

Found out my crc is not ready. The original  spur is too small. My pinion cannot even touch the spur ! Need to buy 100 t spur.

billgate803 發表於 2013-4-20 12:30
Yeah!!!正啊，   f1 打算用vds殼嗎，abc 有隻vds殼好壓風，不過要裝埋其崩把和闊殼柱板 ...

The weather not looking good tomorrow.
I think I'm going to Lali for the first time with my friends.

RoyaleM3 發表於 2013-4-20 19:43

                               
登錄/註冊後可看大圖

I'm only going to use my old 104 shell ja. 104 shell not good ?

Will look into vds sin.

F1殼比較VDS,  在下壓力上一定是VDS優勝，不過玩車最緊要自己開心，裝任何殼都可以有高手

有些F1會裝尾擾流，但12仔是不需要，因12仔全個殼都是擾流

Tested the car at jv today.
The car handles very well.
Much better than my ex-serpent.
If you buy this car, and build it properly, you won't be disappointed.

I played 17.5t, full turbo today - not fast enough for me.
Will change motor later....
Will change motor later.

RoyaleM3 發表於 2013-5-5 21:35

                               
登錄/註冊後可看大圖

Tested the car at jv today.
The car handles very well.
Much better than my ex-serpent.

好哦，您今日搭多少齒，有無相相睇

The original one with 40 pinion.

I'm using iPhone to go online, I don't think I can attach photos.

Pm me your number. I will whatsapp you photos.