點解硬係唔平衡

其實係故意造成左右不平衡定係設計上既失誤?
入面果隻硬係轉得入D
點解硬係唔平衡
到底轉入D好走定係左右平衡好走D
見到飄移車果D左右仲離普

ackermann

呢個係正常，有助轉向

轉向半徑都唔一樣掛?

向其他師兄學習學習

輪胎轉向幾何問題 如果外胎角大過內胎角

輪胎會拗下拗下

this is  Ackermann steeling geometry.

because when a car is turning. all the wheel will have a different radius from the center. Means wheel will have different distance travel . to solve this problem. we have gear / ball differential at the rear.
we have front Ackermann angle at the front to solve this problem, specially most of the car use front solid axle .

toe out on turn

乜咁多師兄講toe out呀？

轉彎大細圓周, 內彎較細,外彎較大, 樓上師兄已經解釋得非常清楚

好!又學到嘢！感謝各位！

Serpent漂移車

Allan007 發表於 2013-5-23 00:53

                               
登錄/註冊後可看大圖

乜咁多師兄講toe out呀？

冇辦法

多謝各師兄指教.

你在轉向組上的波頭加2-3MM collar就會平衡好多, 效果遲些講你知,自己感受下啦