想問1/8 GT ESC問題

0433433 發表於 2013-6-23 08:58

                               
登錄/註冊後可看大圖

鋁合金c座
鋁合金頭尾撐
A臂補強carbon版

水塘即係9粒？

965 發表於 2013-6-23 03:43

                               
登錄/註冊後可看大圖

Novak lei? The new active 8 is good wor...

Novak 邊樹有？

saihung281692 發表於 2013-6-23 14:19
水塘即係9粒？

係呀

saihung281692 發表於 2013-6-23 02:34

                               
登錄/註冊後可看大圖

咁師兄有乜好提議呢？

So far I used HW, Viper and toro 120A (old version)
HW is good, toro also ok..and i just bought Toro 150A (blue) to try, can update you next weekend.

But I will not recommend VIPER...if people their website setting is wrong, then why show it on their website...Also the shop i bought it from mention I HAVE TO USE THIS SETTING, and i followed...what happen?? Smoke came out after 1 lap..

Well..i used other brand and all have their good and bad, but nothing like viper will get burn off after 1 lap..

我同我朋友兩部都冇事
師兄你用咩齒比
會唔會係谷得勁得濟

kennethcheng 發表於 2013-6-23 22:31

                               
登錄/註冊後可看大圖

So far I used HW, Viper and toro 120A (old version)
HW is good, toro also ok..and i just bought To ...

Thanks for your information,Btw where can find Tekin's dealer of HK?

我奇怪D 用LRP ESC，2450Kv 摩打，18 摩打齒，好玩唔太熱，速度正摸索中

Viper......燒死未得天光。 想見條屍， 搵下舊POST。成日話自已點勁，燒，佢就最勁。
Tekin, 速度高， 多野玩。用電腦SET。易攪。
HW， ＄＄ 合理。

0433433 發表於 2013-6-23 23:21

                               
登錄/註冊後可看大圖

我同我朋友兩部都冇事
師兄你用咩齒比
會唔會係谷得勁得濟

Ching.....when I burn my second Viper in the mid of TRC oil Track.  I guess really my seting, like gear ration have issue.  However, once it burn, I change to HW in the next 20 min.  And run few packs without any issue.  And even can change to high teeth of motor gear for higher end speed.

I write here is just share my experience to ching for prevent from item with potential issue.  1.6 K is not a small buck to numerous while other product like Tekin is selling at similar price range.  But that is from a high reputated design.

benz1850 發表於 2013-6-25 00:01

                               
登錄/註冊後可看大圖

Ching.....when I burn my second Viper in the mid of TRC oil Track.  I guess really my seting, like ...

But which is the HK dealer of tekin?

saihung281692 發表於 2013-6-25 00:56

                               
登錄/註冊後可看大圖

But which is the HK dealer of tekin?

the dealer of tekin is Lali Warehouse, it provides warranty

TKOFANS 發表於 2013-7-1 22:45

                               
登錄/註冊後可看大圖

the dealer of tekin is Lali Warehouse, it provides warranty

Thx, 但係知唔知RX8 gen2 幾時到呢？

8仔 Viper 電變我見JV 都有ching 用梗，佢仲相當之快，好熱但又無cut 機又無燒，唔通係QC 問題?

benz1850 發表於 2013-6-25 00:01
Ching.....when I burn my second Viper in the mid of TRC oil Track.  I guess really my seting, like ...

師兄你用咩摩打？

saihung281692 發表於 2013-7-2 01:02

                               
登錄/註冊後可看大圖

Thx, 但係知唔知RX8 gen2 幾時到呢？

in stock la

TKOFANS 發表於 2013-7-2 13:51

                               
登錄/註冊後可看大圖

in stock la

有貨?

見朋友用HW 150A最少燒過兩次、我用tekin rx8 gen1未燒過  

yyyymmdd 發表於 2013-7-24 12:20
見朋友用HW 150A最少燒過兩次、我用tekin rx8 gen1未燒過

咁睇怕都係用tekin 好D

RX8 gen2 1 樓有好似千4咁上下

大野 發表於 2013-7-24 12:34
RX8 gen2 1 樓有好似千4咁上下

Thx,ching