JV中間個細彎時常CUP車,應向那方面著手?

JV中間個細彎時常CUP車,應向那方面著手?
CAR:TT02(458) ,TP36R ,Sport Tuned Motor
op: 中軸及杯,bearing,TRF避震(前籃後黃),高速齒68T,25T摩打齒

係咪上紅白間先反？

先要知是否車殼類型及升得太高？車架離地距太高？油壓及彈簧較硬又常上斜坡.....等等。

kkchung 發表於 2013-8-27 12:12
先要知是否車殼類型及升得太高？車架離地距太高？油壓及彈簧較硬又常上斜坡.....等等。 ...

Thx kkchung
原來車殼尾部底了1格,現升回1格,車尾用手壓落尾部車殼底無掂地應該ok,其待下次再試

会否套呔到期咬唔住？湾心比太大油?

各位師兄!我都有呢個問題，請問如果換硬一點的防傾桿，會不會有幫助?

60度避震油.......

另CHECK一下避震會唔會SET得太高......加O RING....

另套太都睇下........

如果JV有高手可以請教一下......THX

試下頭換40度呔

車高同車殻款重心太高是最大疑兇！

The easiest way to do...if using rubber tires, put SUPER GLUE on the front tires's "EDGE"....just rim around the front tires edge with a thin coat of super glue and give that a try.
Main reason your car is tipped over is due to high bite of your front tires while turning.....of course, all of the above are also good suggestion but I always use super glue method first because it is the easiest and fastest way to correct "traction rolling..".