TNRacing TA05 mini

原帖由 Tim 於 2007-2-16 04:30 發表
Gavl - I'm impressed that you got the kit!
Please post photos when you finish it.
Do you know anyone that can cut out carbon fibre? If so, I can scan/draw up the battery holders exact dimens ...

Hi, thank for your advise but i don't know anyone can cut the graphite, is any bro. can help?
and for temp. i will go for the adhesive, and is the battery holdler can hold saddle pack (not stick)?

For the rear belt would like to have the spare first that's make me feel more confortable,
did you check from (新填地), or other place??

I only have the chassis and the rear ball diff and some ta05 spare parts , need to buy a lot of stuff.

Did you play with sport tune(黑皮豬) or 23T?

Hi, I haven't tried saddle pack - only stick pack, so not sure.

I have done a special order or backorder with rainbow 10 in japan for other parts, I'm sure they would be able to get the belt for you.

I played with sport tuned, but geared at 5.5:1 - much faster than M03

Have you seen the TN website, they have a 225mm wheelbase version of their mini, with an MX-5/Miata body

原帖由 Tim 於 2007-2-23 09:17 發表
Hi, I haven't tried saddle pack - only stick pack, so not sure.

I have done a special order or backorder with rainbow 10 in japan for other parts, I'm sure they would be able to get the belt for ...

how to make 225? flip A-Arm?

原帖由 Tim 於 2007-2-23 09:17 發表
Hi, I haven't tried saddle pack - only stick pack, so not sure.

I have done a special order or backorder with rainbow 10 in japan for other parts, I'm sure they would be able to get the belt for ...

Hi Bro,

Will you make the order from them? even parts or 225 wheelbase new chassis?

Hi Bro Tim,

Regrading your previous page about the list of the mini Ta05 parts, i do have some question would like to ask

1) Cross reinforced carbon arms <- what's this? not include in M03M F parts?
2) Tamiya 5mm short adjusters ??
3) Tech Racing Universal <- is made by Alum? using on front or rear? better than Tamiya?
4) what the lenght of Tamiya universal shaft?

Thanks!

Hi zender - not sure how they did it, but I know you can get an M03 to 225mm by flipping the arms, so maybe they did the same?


Hi Gavl,

Would you like me to add a rear belt on for you next time I order from Rainbow 10?

1/ Cross reinforced carbon arms are made by "Cross", they are for M03 & M04 lower arms. I will take a photo to show you them more clearly, they are not a tamiya part, they just look cooler than the tamiya arms

2/ Tamiya part no. 50797 - used on the upper arms/upper links. Allow you to adjust camber.

3/ Tech racing uni, blue alloy (TM3100 Super universal shaft &yen;2,500), use only in the rear as they are more likely to be damaged if used in the front and you hit something.
Nope, Tamiya rebuildable uni (53597) is stronger … and if you're after lightweight you can buy the Tamiya titanium wheel axle (53681), this will also work on the M03 ... but they will wear out in 6 months, where as the standard steel parts (53597) will last for over 1 year.

4/ Tamiya rebuildable uni (53597) has 30mm swing shaft.

Hi Tim,

Of course if you can order the spare rear belt for me that will be good idea.
of course if we can find any replacement that cost more cheaper.
Did you get the tech racing uni from Rainbow 10? or you can find in Hong Kong?
and how long the shaft for mini ta05?

thanks!

Ok, next order I will see if I can get a belt or two

Yes, I bought the tech uni from R10. Not sure if HK has it ... rcmart.com sometimes have.

The shaft on the TA05 ... you mean the uni shaft right? same as mini M03 - 30mm.

By the way, I'm not in HK, I live in Melbourne Australia

原帖由 Tim 於 2007-2-27 11:38 發表
Ok, next order I will see if I can get a belt or two

Yes, I bought the tech uni from R10. Not sure if HK has it ... rcmart.com sometimes have.

The shaft on the TA05 ... you mean the uni s ...

I jsut saw a TN05 mini conversaion kit selling at Yahoo japan at 25000 yen!!!


by the way, Melborune is hot now~~..hehe

25000 YEN is not enpensive, i bought from Japan's RC shop higher than this!

原帖由 gavl 於 2007-2-27 16:51 發表
25000 YEN is not enpensive, i bought from Japan's RC shop higher than this!

yes.....it was a bargin, pitty i dont have TA05

Here  is the picture~~

                               
登錄/註冊後可看大圖