awesomatrix A700 evo

萬分感謝各位支持與寶貴意見
現已著手尋找香港當地的配合 目前不便之處請見諒
缺件不良品很難完全100%避免 如果發生我方定盡快處  Awesomatix的規模目前還不大著實還有改善空間  敬請各位持續提供寶貴意見 we are listening
年前無法安排到HK機位 但是我朋友Tony Tam 明日到香港 他會盡力協助各位 年後我才能過去與各位交流

亞標 發表於 2014-1-22 23:46
不如請正式代理講解一下水貨和行貨的分別？以及購買正價客戶較水貨者可享有那一些具體的產品支援？ ...

關於這問題  我們與廠方已開始討論幾個方案  很快會有結論

tony tam 會去那裡？？？可否邀請他到aco一趟……參加我們星期六舉行的歐州房車錦標赛……大家也很想看看a700 evo 跑姿同比拼性能如何……到時應該有很多資深玩家輪住

trf415msx 發表於 2014-1-23 12:16
tony tam 會去那裡？？？可否邀請他到aco一趟……參加我們星期六舉行的歐州房車錦標赛……大家也很想看看a7 ...

I will let him know and go to aco on Saturday.

车架已经收到，但是两片option plate有瑕疵，希望能换

xushiming 發表於 2014-1-23 15:30
车架已经收到，但是两片option plate有瑕疵，希望能换

方便傳照片過來嗎?
請問您是上海那位朋友?

Just test it again in JV....yes it is super fast with very stable corner entering..one minor problem of FFG: a light collision will bias the front gear box to one side easily, seems the clamping force of AM40 and AM46 are not strong enough. Well, this problem is not fatal to the run, but in long term, the ends of granite rod will be grinded and need to be replaced.

Tinng 發表於 2014-1-23 17:50
Just test it again in JV....yes it is super fast with very stable corner entering..one minor problem ...

I will address this problem to Awesomatix, have you try to loosen the P31 stoper a little bit?  some times it push agaist the camber plate cause excessive friction and then the gear box wont come back to center.

rcpinky 發表於 2014-1-23 18:06
I will address this problem to Awesomatix, have you try to loosen the P31 stoper a little bit?  so ...

I will try loosen the P31 and leave some gap...let u know the result next week.

rcpinky 發表於 2014-1-23 17:39
方便傳照片過來嗎?
請問您是上海那位朋友?

恩，我们邮件联系

已经邮件联系了文平兄，回复非常积极，选择awesomatix果然明智，有负责的代理协助，相信大家都能玩得很放心  

Tinng 發表於 2014-1-21 16:27
玩得順要買多塊spare, 吾係怕佢攣，係怕佢吾耐磨...1.5mm好快磨哂

Trial part  果時板邊有四個開口

Evolution of Alu chassis
The second proto had cut out but as the pic shows we all lock it down, therefore the production has no cut out, but if you need more flex you can still cut by yourself.
How to post pic?

十小時的進度……

樓主，分享喺外國網站爬文講有兩點可以做：第一係可以用熱縮膠包住個三節棍身位防止碰撞嘅時間散開，做法同佢砌圖紙教用P20套住異曲同功。第二，用一橛仔油喉套住SPR01同ST05防止喺A臂跳波子時散晒四圍飛

Good method but I use oring instead of fuel tube
Heat shrink tube is another method, but I glue P20 and it is removable.
Both are good tips
I just cannot post pics

rcpinky 發表於 2014-1-23 10:19
萬分感謝各位支持與寶貴意見
現已著手尋找香港當地的配合 目前不便之處請見諒
缺件不良品很難完全100%避免 ...

明天tony何時到aco

Tony should be at ACO in the afternoon.

good..please inform tony to find Dan or 阿倫or Rick....thanks...

Thank you for everyone at ACO yesterday. It is really nice to meet all of you. Tony Tam