新仔入手 scx10

hotelnissan 發表於 2014-1-18 02:23
you need to bleed the shocks, not just pour it in and close the cap.  This method is not going to wo ...

Thanks for pointing that out, I got it fixed and can flex normal now!  

我都想問, 扭腰要扭到乜野水平, 先為之收貨?

又同埋, 如果想佢扭得勁D, 要調較邊度呢?

我都係scx 10 dingo.

longer shocks,  softer springs, 4 links set up, spring pre-load, may make it flex more. I don't like too much flex on scx10. scx10 is still a trail crawler not a rock crawler.  

Good enoght?

多謝ching 意見, 睇你張相, 我部同你差唔多.

原來又有分trail crawler 同rock crawler. 咁, 有乜model 係rock crawler?

我正常 flex 到咁。
睇外國玩家話拆左 shocks 個 bump stop 可以 flex 多少少，我試過但條 tire 會 hit 到 flare , 變相要 trim 個殼所以冇整。
早幾日砌好晒未有時間出車。玩多排先再按需要 upgrade!

http://www.amainhobbies.com/product_info.php/cPath/1_44_912_2648/products_id/253806/n/enRoute-Berg-22-Tracer-V3-Rock-Crawler-Chassis-Kit-w-Wheels-Tires

eric I think yours is looking great.  I removed my bump stop.  mine rub the body a little bit.  I did not trim the body but raise it up higer.  to 亜邊個 I post a amain link that is a rock crawler most of the time thy use 2.2 wheels only.  trail cralwer use both 1.9 and 2.2 .   it depends what places you are running it.  

昨日放假上埋色完成。
新手第一次整殼好核突

ok wor..I like it.   as long as you enjoy the whole process.

昨日行街又出事，行下睇下又唔見錢！

電子野
AE-1
Towerpro MG996R

變成
AE-2
Savox 1210SG

RX TX 仲用緊 GT3C
師兄門有咩提議？

Ericang 發表於 2014-1-24 12:35
昨日行街又出事，行下睇下又唔見錢！

電子野

If already using GT3, then no need to buy !!

For yr referrence, I am using SP 45A 21T on Wraith, except the speed is a bit slow, the combo is great !

Ericang 發表於 2014-1-24 12:35
昨日行街又出事，行下睇下又唔見錢！

電子野

你隻 AE2 邊度買架？？

幾錢

Thx

AE 2 good ESC, you can use Castle Link for programming. RX TX as long as it runs, I will not buy a new one.