carbon lipo AE86

a recent DIY

你係 CT 個 Billy !?

原帖由 billy86che 於 2007-1-10 22:46 發表
carbon lipo AE86
a recent DIY

何以見得是AE86？謝~

原帖由 清清 於 10/1/2007 10:53 PM 發表

何以見得是AE86？謝~

果條鈴係~

another photo

只係覺得今既mod.....好似1:10 touring 車架

不過lipo 可以玩到幾耐呢?

I am using 500 mah batt and a 60 turn motor. the car can run about 10 mins.

原帖由 billy86che 於 2007-1-10 22:59 發表
I am using 500 mah batt and a 60 turn motor. the car can run about 10 mins.

會唔會比普通電爆?

DIY collection

Diy car 3 & 4

原帖由 kaho0338 於 2007-1-10 23:01 發表


會唔會比普通電爆?

Yes. It is 7.4 V on average and 8.4 V when fully charged.

原帖由 清清 於 2007-1-10 22:53 發表

何以見得是AE86？謝~

see this

原帖由 billy86che 於 2007-1-10 23:12 發表


see this

THANK YOU

all are lipo.

老師果然利害~

原帖由 checkie 於 2007-1-11 03:44 發表
老師果然利害~

老師加工程師

睇下 billy 魔打上面粒電容大到！？

原帖由 terencelyl7411 於 2007-1-14 19:38 發表
睇下 billy 魔打上面粒電容大到！？

How big? Which one? I guess I use only normal type.

do you have all the DIY steps ( with photos), I think you have done a very good DIY job.

原帖由 rk2 於 2007-1-15 12:26 發表
do you have all the DIY steps ( with photos), I think you have done a very good DIY job.

I have steps on making the carbon enzo and making the rear damper of the subaru but not with this one. You can refer to previous posts.

Try the following:
http://rc-one.com/phpwind/read.php?tid=2229&fpage=7
http://rc-one.com/phpwind/read.php?tid=2595&fpage=6

[ 本帖最後由 billy86che 於 2007-1-15 13:46 編輯 ]