唉......好慘呀...燒車呀

原帖由 76人‧小狂 於 2007-1-12 03:20 發表
o岩o岩我又走去試o下佢，
掣都未 on ,
一插電又即刻出煙......
好灰...冇得救la我念...


好多謝各位肯睇我"呻"...
thx......

唔好再試la.....我都試過死esc.....有隻v16......出煙....無耐着火tim.......
危險呀.....掉左佢 la..

[ 本帖最後由 kaho0338 於 2007-1-12 03:36 編輯 ]

fell so sorrey for you brother

i just buy a new MC330 for my TA05/DF03.....

可能係個"黑皮豬"摩打有問題番, 我試過燒摩打(斷炭刷銅片)連累個MC116都有事.
換個另一個摩打試吓la.

[ 本帖最後由 fyin 於 2007-1-13 23:46 編輯 ]

原帖由 fyin 於 2007-1-13 23:45 發表
可能係個"黑皮豬"摩打有問題番, 我試過燒摩打(斷炭刷銅片)連累個MC116都有事.
換個另一個摩打試吓la.

wa...... MC116.......好嘢嚟喎 !!......

I am so sorry to hear your esc was burnt!
In normal case that esc so be OK very durable, please check the below items:-
1. remove the motor gear and check the car can rotate freely or not, otherwise check the bearing clearance, may be too much shim plate, check the wheel adapter clearance, may be the plastic adapter deformed and cause friction.
2. check the cable connection to the motor, ensure no short circuit.
3. install the motor to the car and ensure the motor is not too close.
3. try to connect battery and trigger it, the motor should not be stop at once after the throttle just release,  otherwise check the mid. ptl. of the esc.
Remember the check the above items all before using your new esc, hope you can play rc happy!