本帖最後由 nel3838 於 2014-6-13 22:15 編輯
The way according to instruction is remove all four screws and lift up front of the the upper deck.
However, my prefer way is to loosen front two long screws slightly (not removed), remove centre two screws and unplug the top end ball joint of the center suspension.
Lift up the back of suspension, tilt the upper deck forward, tilt the motor pod back, the battery can slide in/out backwards easily that way.
In this way, it saves fiddling with the front two long screws, and for me is much quicker.
Hope this helps.
|