硬穀上色一問....

小弟之前嘖過一個lunch box...
(先嘖左個底色...之後係個底上面再拉花....我用黃色果d膠紙貼係上面再嘖油..
點之一拉出黎果時...就整甩左d底色)

想問問有無方法可以貼左膠紙之後拉出黎係唔會甩底色架??

你係唔係用錯左PS油噴?
硬殼用TS油

我係用TS油架....>.<

原帖由 alwaysnico 於 2007-1-30 12:13 發表
你係唔係用錯左PS油噴?
硬殼用TS油

佢無先清除模型上面果D離模劑就真
所有模型係生產後, 表面或多或少都會有一層離模劑, 所以好似噴透明殼之前都會先洗一洗噴果面先噴啦
而硬膠模型都會有的，所以噴色之前都係搵D FILTER(希望冇串錯 )抹下先再噴

原帖由 AlexFiona 於 2007-1-30 14:12 發表


佢無先清除模型上面果D離模劑就真
所有模型係生產後, 表面或多或少都會有一層離模劑, 所以好似噴透明殼之前都會先洗一洗噴果面先噴啦
而硬膠模型都會有的，所以噴色之前都係搵D FILTER(希望冇串錯: ...

Filter易找到嗎？KWS有冇？咩牌子較理想？先謝！

哈哈, 老人家失憶, "THINNER"打左"FILTER"都有
比張相你睇下啦, 各大模型舖均有代售嘅

my own expericence is use water-type sand paper to sand it first...then use detergent to clean it through....spray a layer of surfacer....then the paint.........right it's much more work....but so far the paint won't tear off from my LB.....

原帖由 monkichi0210 於 2007-1-30 17:08 發表
my own expericence is use water-type sand paper to sand it first...then use detergent to clean it through....spray a layer of surfacer....then the paint.........right it's much more work....but so  ...

你講用水磨沙紙嘅話多數係砌"手板"先會噤攸咋喎

原帖由 monkichi0210 於 2007-1-30 17:08 發表
my own expericence is use water-type sand paper to sand it first...then use detergent to clean it through....spray a layer of surfacer....then the paint.........right it's much more work....but so  ...

Father monkichi, what is surfacer?  so pro wor!!

原帖由 AlexFiona 於 2007-1-30 17:37 發表


你講用水磨沙紙嘅話多數係砌"手板"先會噤攸咋喎

梗係唔係....砌任何塑料模型原則上都要作打磨........主要是令表面少少"鞋"....食地灰多d.....另一功能是修復啤膠時的縮膠位等....當然....rc殼就唔駛咁講究....但我強調我自己都會做呢個step......大家做唔做自己決定........

原帖由 gibson 於 2007-1-30 17:40 發表



Father monkichi, what is surfacer?  so pro wor!!

大哥Gibson,
其實就係呢d......即有人叫"地灰"....又人叫"底灰'......模型用品.....可以令d油咬得實d.....1000號幼身d.....500號粗粒d......市面仲有1200號.......1000同1200號d人通常用來噴車....比較滑d......再上顏色油都靚d.......但留意1000號有分白色同灰色......for唔同車身顏色用.....例如打算噴白色、紅色同黃色等較鮮的車身色.....就要先噴"白色地灰"...再噴色......顏色就唔會受灰色影響變沉了........
其實某程度上用在rc車上是太silver hand的......但習慣改不了......