Tamiya Buggy

I'm beginner and looking for a Tamiya Buggy. I could want to what is the difference in between #58596 and #58568? And which is better?

佢地都係同一款車種TT02b,除body之外，是沒有分別！這車勝在parts多，抵玩

Thx Ray, as i seem their selling price have a big difference but they are using the same chassis.

I got the Dual Ridge, it comes with the TBLE-02S ( can use with brush or brushless motor). I think that it is good deal.

Is any suggest hopup parts for Dual Ridge?

fun car, no need hot-up

I only change the followings:
1. Aluminum Propeller Joint;
2. Aluminum Motor Mount ; and
3. Aluminum Propeller Shaft .

Thx all.
Is necessary replace the bearing with Teflon Ball Bearing?

Yes ..  ball bearing is a good idea ..  just 幾十蚊, 已經有電變, 平平地買個 10.5 T 麼打 .. 夠 la ..

Thx buddy

我都入咗 dual ridge，搵緊原廠前後 frp damper stay. 請問有無師兄知邊度有貨？Thanks.

alexmichael 發表於 2015-2-10 19:33
我都入咗 dual ridge，搵緊原廠前後 frp damper stay. 請問有無師兄知邊度有貨？Thanks. ...

RCmart 見有貨。
不過我覺得頭OK,尾油壓架就太弱。

965 發表於 2015-2-10 00:56
Yes ..  ball bearing is a good idea ..  just 幾十蚊, 已經有電變, 平平地買個 10.5 T 麼打 .. 夠 la ..  ...

原裝ESC說明書講10.5T齒比唔好去咁盡OR加風扇可以減小overheat

kitman 發表於 2015-2-10 22:44
RCmart 見有貨。
不過我覺得頭OK,尾油壓架就太弱。

Thanks, 已在 RCmart 訂咗。前後換晒感覺上舒服啲...

Hi Ching, which paint you used for dual ridge body?

請問點解54501+2 Al.propeller shaft  & joints 裝落車前後虚位咁大...
塞個粒 o-ring 入鋁杯内都無乜作用...
前面個 joint 有機會走位鬆出嚟少少有無問題㗎?

重複,deleted

alexmichael 發表於 2015-2-12 18:14
請問點解54501+2 Al.propeller shaft  & joints 裝落車前後虚位咁大...
塞個粒 o-ring 入鋁杯内都無乜作用. ...

我裝咗。但係加咗o ring無虛位喎。

kitman 發表於 2015-2-12 18:38
我裝咗。但係加咗o ring無虛位喎。

唔知係唔係裝錯...

我想問前外置BUMPER的sponge應該係什麼part no?