沙猪比較容易損壞是邊 PART 呀？

原帖由 mark999hk 於 2006-2-14 16:44 發表


Mr. Skyline, do you have Savage X?

Not yet brother, haven't seen in HK and is only available via U.S. websites that ship goods worldwide .... price is not bad at all ...  

大鑊~~昨天走出 KWS 找粒手拉/電撻的單向 Bearing，週街都冇貨。部沙猪又要 wait 才可以玩~~真係"頂"吖

原帖由 mark999hk 於 2006-2-16 10:43 發表
大鑊~~昨天走出 KWS 找粒手拉/電撻的單向 Bearing，週街都冇貨。部沙猪又要 wait 才可以玩~~真係"頂"吖

快摺有冇現貨？

原帖由 Skyline 於 2006-2-16 02:13 PM 發表



快摺有冇現貨？

Only have 手拉$185-$190 instock, but no 單向 Bearing

原帖由 mark999hk 於 2006-2-16 14:17 發表


Only have 手拉$185-$190 instock, but no 單向 Bearing

Buy from interent la.
http://www2.towerhobbies.com/cgi ... mp;I=LXDLN7&P=7

原帖由 WTO 於 2006-2-16 03:48 PM 發表

Buy from interent la.
http://www2.towerhobbies.com/cgi ... XDLN7&

Thanks, Mr. WTO.  I just got a 100% new 25class hand start and the oneway bearing this afternoon by 2nd hand.  It is only 200 for whole set.  But anyway, thx alot

Wai brother Mark, you see what I made!!??

原帖由 moki 於 2006-2-16 08:32 PM 發表
Wai brother Mark, you see what I made!!??

You carzy guy.  But I love it~~

各位師兄，小弟有小小嘢請教。就是如果我 Run-in 我部沙猪 25 級 Engine (部沙猪放在地上不動的時候)，部機的理想温度是多少呀？ 及放在地上慢慢行的理想温度又是多少？ 當 Run - in 完成，它的機温的可以去到幾多而又不會 Over Heat 呢？ 謝謝

always keep it below 120c when after high speed running.

原帖由 WTO 於 2006-2-20 03:59 PM 發表
always keep it below 120c when after high speed running.

But how much for run-in ar? thanks

原帖由 mark999hk 於 2006-2-20 16:02 發表


But how much for run-in ar? thanks

not exceed 100c

原帖由 WTO 於 2006-2-20 04:06 PM 發表

not exceed 100c

Thanks fo your reply.

我之前果架就 idle 70-80℃ 幔走 90-100℃ 極速110-120℃,副机過120℃就開始立机,
過140℃就overheat！

原帖由 rickyl215 於 2006-2-20 04:22 PM 發表
我之前果架就 idle 70-80℃ 幔走 90-100℃ 極速110-120℃,副机過120℃就開始立机,
過140℃就overheat！

but the 25 class engine is very easy to go to 90℃-100℃ if I put on the floor (no running) when I run-in the engine.  why gei?