部scx10 g6 servo arm頂住咗

先前諗住用嘅方法完全唔得！不過依家又通行無阻！見唔見到有咩改動？

入錯窿? wrong hole ?

完全冇錯到呀，純粹servo太凸出，依家我將兩舊膠用嚟固定兩邊個兩個tab位移除，咁托住電池架嗰舊膠就可以推向前，跟著上粒螺絲頂著舊膠！servo家陣就夠晒位。

扭力之亡者 發表於 2015-8-8 15:06
完全冇錯到呀，純粹servo太凸出，依家我將兩舊膠用嚟固定兩邊個兩個tab位移除，咁托住電池架嗰舊膠就可以推 ...

溫馨提示，如果你有行外置BEC還好, 有11.6kg , 如果行6V BEC 就得返9.6KG , 爬爬好大可能要大力少少Servo . 正常電變出6V

我用外置bec,應該ok。試吓效果先，如果唔係好得先再upgrade，剩番嘅servo可以留畀我下一個project(拖頭)用。

扭力之亡者 發表於 2015-8-8 15:25
我用外置bec,應該ok。試吓效果先，如果唔係好得先再upgrade，剩番嘅servo可以留畀我下一個project(拖頭)用 ...

Specifications

Motor Type:	3 Pole
Bearing Type:	Dual Ball Bearing
Speed (6.0V/7.4V):	0.20 / 0.17
Torque oz./in. (6.0V/7.4V):	133 / 161
Torque kg./cm. (6.0V/7.4V):	9.6 / 11.6
Size in Inches:	1.65 x 0.83 x 1.57
Size in Millimeters:	41.8 x 21.0 x 40.0
Weight ounces:	2.12
Weight grams:	60.0

其實7.4V對接收有否壞影響？

問題係你要肯定隻外置BEC有7.4V輸出,因為我見你隻Hitec 6V 得9.6kg , 爬爬我怕有些位置會力不重心. 你行左外置BEC , 隻BEC有寫可輸入電壓. Taobao 好多都支持2-6 Cell Lipo , 吾會對接收有壞影響.

我都係最近先再玩返遙控，以前年代接收一向工作電壓都只係6v。

This is normal problem for SCX10. Good to see Ching to solve this.
I just filling the plastic bridge part and let the horn to move freely.

sam

sam529 發表於 2015-8-20 08:19
This is normal problem for SCX10. Good to see Ching to solve this.
I just filling the plastic bridge ...

Same here!!!   lolBut this CHing's method seems to work pretty nicely~