Li-Ion / Polymer Balance Charger

Who use these chargers ? Any comment ?
Only $650. can charge both Li and NiMH batteries.

Imax B5：Detailed Product DescriptionSpecification:Operating voltage range: 10-18VCircuit power: max. 50WCharge current range: 0.1-5ACurrent drain for balancing Li-po: 200mAh/cellNi-Cd / Ni-MH battery cell count: 15 seriesPb battery voltage: 6V, 12VWeight: 280gDimensions: 130 x 80 x 23mm RC-Power 601BCDetailed Product DescriptionMicroprocessor controlled high-performanceRepaid charger/discharger for Ni-Cd/Ni-MH/Li-polymer/Pb batteriesUSB communicated analysisTemperature sensor and separate voltage detectorCharges current up to 5A and discharges current up to 2A, 5 batteries memories1-5 series Li-ion/Poly, 1-12 cells Ni-Cd/Ni-MH, 6 and 12V lead-acid (Pb) batteriesSpecifications:Computerized balance charging system1-5 series Li-ion/polymer battery1-14 cells Ni-MH/Ni-Cd6-12V lead acid (Pb)Charging rate: 0.1-5A; discharge rate: 0.1-2ABattery memory: 10 models; USB PC linkAC-DC adaptor; multifunctional battery connector

i max B5 出面賣$500樓下,但差咗三次就燒咗嘢！ (正常使用下)

So bad !!

原帖由 Han 於 2007-3-16 23:32 發表
i max B5 出面賣$500樓下,但差咗三次就燒咗嘢！ (正常使用下)

要自己加風扇嫁,我果部用咗兩個月都冇事呀

原帖由 oasc 於 2007-3-16 23:44 發表

要自己加風扇嫁,我果部用咗兩個月都冇事呀

我用2A bal差2200ma 3cell 鋰電,差咗唔求一分鍾熱都未熱就瓜咗！之後自己整番！死咗3号果粒.......

wah, so bad

我今天想出去買好彩我未買叉d買了

原帖由 Han 於 2007-3-17 00:02 發表

我用2A bal差2200ma 3cell 鋰電,差咗唔求一分鍾熱都未熱就瓜咗！之後自己整番！死咗3号果粒.......

High hand,

原帖由 Han 於 2007-3-17 00:02 發表

我用2A bal差2200ma 3cell 鋰電,差咗唔求一分鍾熱都未熱就瓜咗！之後自己整番！死咗3号果粒.......

请问师兄D部野质量得吾得呀？

原帖由 hellboy 於 2007-3-17 12:24 發表

请问师兄D部野质量得吾得呀？

容易燒嘅問题就可能係我唔好彩啦！但部機嘅voltage顯示都不太準確！

原帖由 gibson 於 2007-3-17 12:10 發表



High hand,

慚愧

想問下各位2cell&3cell用幾多A差呢？

唔好大過1C

At such, these 2 chargers are not a good product. It seems that if we want a charger that can charge both NiMH and Li-poly, we should go for the Much More....