RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1425|回復: 5
打印 上一主題 下一主題
收起左側

mini inferno questions

[複製鏈接]
跳轉到指定樓層
1#
agentjerry 發表於 2007-4-22 19:08:18 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
hi.
big brother
i brought a koyosho SP motor $98 but there is not change in speed.
i want to change the esc and servo to increase its speed. i know i need to buy a receiver too.
do u have any recommend for esc servo and receiver. do i need to buy a new control? and how much are for these items?

also if i just buy the 9.6v battery (for mini inferno) is it ok?

tks
2#
DriftNoobie 發表於 2007-4-22 19:12:13 | 只看該作者
For Mini Inferno, if you change ANY electronic parts, you have to change ALL of them.

Transmitter, Receiver, ESC, Servo...

For 9.6v, you must check if the "new" ESC support 9.6v or not.
If using original electronics, you better add an additional Kyosho device. Or else, the Kyosho original electronic may FRY!

Good luck.


WHY DOUBLE POSTING?
3#
CDR123 發表於 2007-4-22 23:32:37 | 只看該作者
More info. for 9.6v local ECS about $160~ 190, and a hi-tech 81 metal gear servo about $170~ 190. add receiver so can be run faster.
4#
 樓主| agentjerry 發表於 2007-4-23 18:46:06 | 只看該作者
原帖由 CDR123 於 2007-4-22 23:32 發表
More info. for 9.6v local ECS about $160~ 190, and a hi-tech 81 metal gear servo about $170~ 190. add receiver so can be run faster.


so if i can use the original remote control? and how about the battery? buy the 9.6V?
5#
CDR123 發表於 2007-4-24 00:00:44 | 只看該作者
you cannot use the original remote control if you change the ECS & servo.
6#
 樓主| agentjerry 發表於 2007-4-24 20:53:02 | 只看該作者
原帖由 CDR123 於 2007-4-24 00:00 發表
you cannot use the original remote control if you change the ECS & servo.


any recommendation for remote control or package?
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-15 01:13 , Processed in 0.028150 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表